• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What is everyone working on in the off season.

Paint is all done but need more basecoat for drivers door. Clearcoat is on everywhere else. it came out like glass. Malex approved.:thumbsup:
——
Yes, you got a great shine going. Kudos to you for teaching yourself body and paint!
 
Today I was doing steering brakes and upholstery.

fit my offset master
Cylinder and had to redo the steering shaft on the Dart.
AB889DD1-C456-4DE3-9455-A6590B63C6BE.jpeg



2DEC8DFB-5E25-4FAC-A51B-52AF642AA877.jpeg


Then I got busy and got the backseat upholstery onto the seat frame and back into the Dart. Bottom is nearly done.
2DEC8DFB-5E25-4FAC-A51B-52AF642AA877.jpeg


Dash is finished. The old Hurst auto stick is in and ready to go. I bet there’s a few members here who ran these shifters 40 years ago.
AF9908CF-B5BB-4AB2-B13F-E493FC280069.jpeg
0C04214B-369D-4452-8AD4-A51D4D873AD6.jpeg
 
Experimenting with hood scoop to air cleaner lid clearance... will have a couple extra 14" 4500 drop bases for sale.

View attachment 893616 View attachment 893617 View attachment 893618 View attachment 893621 View attachment 893624
---
Will keep you in mind. I've got to try some different stuff on my 64. Ive got the 5" hemi scoop sealed to the Dominator and I get erratic dead spots up on top end, been happening ever since I sealed that big scoop to the air bell.
 
Innovate mounted. Air shifter and ignition box. All circuits tested.

2164B832-5D28-4233-9DF0-6B2CD26B16BC.jpeg 2DEE30D4-39E7-4534-93AC-F71856D14D87.jpeg
 
After the 1st outing, going to be putting this new transmission in the car with the new Neal Chance converter. New PPP shifter as well. Switched to a new transmission builder who has a incredible resume for 50 years. Looking to see how this one works.
Got everything but the driveshaft.

20190316_191935.jpg 20200107_115913.jpg
 
Last edited:
AD8D44BA-759B-401A-A75D-2440A714CC5F.jpeg
Easy peezy this off season.
Heim joint replacement on ladder bars, new rear wheel. Add fuel in April and go racing.
Self sponsored- Answer to no one.
 
6165E7D0-8E5F-4B31-9771-05B5635873D0.jpeg
6165E7D0-8E5F-4B31-9771-05B5635873D0.jpeg
Hope that heim joint makes it leave better than in past years.
I'm sure youd take any sponsorship, because we all know if it's free it's for you.
You need to make a statement, be fast, win races and be consistent to get a sponsor.
Something like this.

View attachment 894035
Looks like you could use a front end alignment. Wheelies aren’t necessary to win. And I do win. Don’t believe you even race anymore. So Anderson or whatever alias you like to use, just keep talking to the voices in your head.
As a matter of fact:
 
That's a great shirt. Where can I get one?
 
Looks like you could use a front lobotomy . Wheelies aren’t necessary to win. And I do win. Don’t believe you even race anymore. So Anderson or whatever alias you like to use, just keep talking to the voices in your head.
As a matter of fact:[/QUOTE]
Fixed!!:rofl::rofl:
 
Got one front seat recovered today
IMG_2543.jpg


The new legendary foam no longer comes with listing attached. They now send you a sheet of broad cloth. You cut the pieces you need and use spray adhesive to attach to the foam, hog ring to frame. Somewhat time consuming, lots of dicking around but works ok.
IMG_2530.jpg



Driver's bucket next up. Ratty looking but the chrome emblem is still attached, frame, springs, backing, all good.
IMG_2540.jpg
60063893286__151C0E87-5AB1-4545-AA00-0E1C5D7BCB3E.JPG
 
Auto Transport Service
Back
Top