FBBO good member alert: Moparfeind !

Kern Dog · Jun 12, 2019

Some FBBO members are known to post up a lot of pictures, others post memes. Some post links to political stories. All of that stuff is great.
FBBO member Moparfeind posts up some great stuff too. He always seems to be tinkering and
"Thinkering" about what to do next. I really appreciate that. Guys like him and Dennis H are inspirations to me and the hobby. We all face obstacles in our lives but instead of letting those obstacles stop him, Moparfeind finds a way around them. Some may already know that he had surgery recently yet he still was spry enough to log on and chat about future plans for his Plymouth.
I am fortunate to be pretty healthy but often I go through periods where my motivation is just not there. A few of those times, I have read someones thread about their projects and it helps kick me in the *** to get moving. I want to openly thank the members like Moparfeind for being who they are. Keep it going, Sir....I like what I am seeing!

66 Sat · Jun 12, 2019

What a lovely positive thing to say. Good work my Mopar brother!

moparedtn · Jun 12, 2019

Atta boy KD. Very astute of you, too.
It's easy for those of us that have gone through health challenges to see and appreciate the
efforts of others who have had similar battles of their own, yet get on with it anyways.

For someone otherwise blessed with good health to be able to acknowledge someone else
who is not so lucky, however, is quite a bit more rare and is to be commended.
Well done, KD. Well done, indeed. :thumbsup:

moparnation74 · Jun 12, 2019

The key thing here is that he works on his car.....I hope I will be able to do the same at that age and what he was dealt with.....

The picture thing carries him light years above the rest....so many time a question can be answered very fast with a single picture...

With all that gent has to deal and dealt with we can’t even get one fully capable member to post a single pic of their car or maybe there is no car......

Skytrooper · Jun 12, 2019

He has always , for me, offered very helpful advice. He is an asset to this board !

Kern Dog · Jun 13, 2019

I was hoping that he would respond here.

Moparfiend · Jan 16, 2020

Kern Dog said:
I was hoping that he would respond here.

Guys I am just seeing this post. Very thoughtful of you KD and the rest of you ehem gentlemen My initial recovery from surgery was actually very easy for me. However month 3 started to spiral down real quick due to all the dam meds they were pumping me with to stop any rejection from the transplant. Finally I am starting to get back to what maybe a new more functional normal and get some time to be more active on both a body and b body forums and to work on the car. Need to start off on the easy projects one of which I had purchased a while ago. That was this MSD adjustable timing module. It allows me to retard or advance +/- 7 degrees to account for fuel octane variation and elevation and temp etc. Now that it’s finally in I can say it does just what you would expect very well. Its hooked to my MSD 6AL box and was a simple instal. I highly recommend it if your engine is on the edge of detonation. High compression steel heads in the hot desert makes me a good candidate! BTW happy new year to you guys Its going to be better than 2019!

chargervert · Jan 16, 2020

Wishing you a better year,this year,a Mopar can be an inspiring thing during difficult times!

moparsaver · Jan 16, 2020

Happy New Year. Keep getting better. :thumbsup:

threewood · Jan 16, 2020

Moparfeind said:
Guys I am just seeing this post. Very thoughtful of you KD and the rest of you ehem gentlemen My initial recovery from surgery was actually very easy for me. However month 3 started to spiral down real quick due to all the dam meds they were pumping me with to stop any rejection from the transplant. Finally I am starting to get back to what maybe a new more functional normal and get some time to be more active on both a body and b body forums and to work on the car. Need to start off on the easy projects one of which I had purchased a while ago. That was this MSD adjustable timing module. It allows me to retard or advance +/- 7 degrees to account for fuel octane variation and elevation and temp etc. Now that it’s finally in I can say it does just what you would expect very well. Its hooked to my MSD 6AL box and was a simple instal. I highly recommend it if your engine is on the edge of detonation. High compression steel heads in the hot desert makes me a good candidate! BTW happy new year to you guys Its going to be better than 2019!

View attachment 895807 View attachment 895808

Happy new year and I wish you the best of health. Keep going on the car. Hope to meet up again and chat. I'll be through Phoenix Tue or Wed if you want to meet for food :thumbsup:

bearman · Jan 16, 2020

Moparfreind, will keep you in prayer to get stronger everyday.

Kern Dog · Jan 20, 2020

Glad to see from you again, man!

Budnicks · Jan 21, 2020

yep, another good guy here :thumbsup:

FBBO good member alert: Moparfeind !

Kern Dog

Life is full of turns. Build your car to handle.

66 Sat

Well-Known Member

moparedtn

I got your Staff Member riiiight heeeere...

moparnation74

Well-Known Member

Skytrooper

1SG (Ret.)

Kern Dog

Life is full of turns. Build your car to handle.

Moparfiend

FBBO Gold Member

chargervert

Well-Known Member

moparsaver

FBBO Gold Member

threewood

FBBO Gold Member

bearman

FBBO Gold Member

Kern Dog

Life is full of turns. Build your car to handle.

Budnicks

Jackstand racer #1 & proud of it, Sir Posts A Lot

Similar threads