• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Hemi HP/torque estimate?

dammstrate

Well-Known Member
Local time
6:39 PM
Joined
Nov 26, 2019
Messages
106
Reaction score
71
Location
Eagan, MN
Yes I know there are a lot of variables, but my recently aquired 66 Hemi Coronet has a well done conversion from a slant-six to a hemi built by Jim Gosselin: BMP iron block, 472 ci, Indy heads, forged crank, rods, Diamond pistons, 10.9:1, runs on 92 pump gas, aluminum 2x4 intake with 2 edelbrock 600cfm carbs, 11" McLeod clutch. Cam card Howards Cams says solid flat tappet, intake .576" 289 deg, exhaust .562" 297 deg.

It's winter here in Minnesota, I have only had it out twice to feel it out a bit. Trip to Sharadon Motors in Hugo coming in the spring for some dyno tune work.

Given the above, any estimates on HP and torque?
 
who cares-it's a stick shift hemi- looks done right
enjoy
with 4 speed do not chase hp vs torque on the street
what's your compression?
 
Auto Transport Service
Back
Top