superbird6bbl
Member
Last edited:
I maybe way off base. It's a Mega block for sure and a 4.25 bore. What do you think that it is?I don't know what you have there, but it sure don't look like any max wedge block I've ever seen. Looks like a later mopar performance block to me. (P as part of part no.,m as part of casting no.). What is the bore size?
I will grab a head or a head gasket and check it out.mopar sold them in the 90s hard to find they are a 4.25 in bore if it has the bolt pattern for a wedge it should have mw stamped on the pad i used to work for mopar
I will grab a head or a head gasket and check it out.
Thank you.It’s a NON Siamese 2 bolt wedge block.
Basically same as the MP 4.25 street hemi replacement block but without the hemi head bolt pattern and 4 bolt mains, Excellent block.
superbird6bbl i have a max wedge one here is the pad on mine it is a nos one also View attachment 905478 View attachment 905479
Apparently mine is just a Wedge block, not a MW. I will look at the pad a little closer to make sure.mine is part number p4529851