FOUND 64 Plymouth Grille

5.7 hemi · Feb 8, 2020

Working on a 64?Plymouth grille for a member and it took a crap. A pin hole that I thought was buffing compound turned out to be a hole and i tried to fill it, but it got bigger. So, I’m in need of a grille or the vertical piece in the center. Let me know what ya got!!

QuickBpBp · Feb 8, 2020

I have to ask. I saw a guy at Carlisle this fall that had some kind of aluminum brazing rod that he melted in the areas like what your talking about and you could sand it down and polish it. Sounds like this could be an option?? Again I never did it but I saw some finished examples and it looked pretty good and it would only be seen from the backside....

5.7 hemi · Feb 8, 2020

I did try that, also very good for ac lines.

bolson6333 · Feb 9, 2020

I have one that is in rough shape. Would probably cost more to get it there than what it's worth but if nothing else shows up you can have it for just what the shipping store would charge to box and ship.

5.7 hemi · Feb 10, 2020

Guys, I appreciate the efforts that went into helping me find a grille. I now have 2 on the way and it got me out of a jam!!

THANKS!!!!

FOUND 64 Plymouth Grille

5.7 hemi

FBBO Gold Member

QuickBpBp

FBBO Gold Member

5.7 hemi

FBBO Gold Member

bolson6333

FBBO Gold Member

5.7 hemi

FBBO Gold Member

Similar threads