• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Trade 1963 cross ram

Status
Not open for further replies.

chad

Well-Known Member
Local time
7:01 PM
Joined
Sep 7, 2014
Messages
214
Reaction score
61
Location
Guelph,Ontario
Feedback: 0 / 0 / 0
Contact seller
Just throwing this out there. I have a 1963 cross ram. May possibly trade it for an A&A cross ram for regular 440 ports.
20200210_182210.jpg
 
Pic isnt so good and my eyes are shot.... but that looks like a Mopar Perf cross ram. A '63 would have four holes at the carb for the throttle plates, instead of one big one. Has it been machined any?? Maybe a couple more (closer ) pix?? Thx

**EDIT** Have to agree with Ski 61701... its not a MoPerf unit, as I dont see a well for the carb linkage, so I think you do have a machined '63 unit. Better pix still help.
 
Last edited:
The carb plenum (4 holes) have been machined away...not good.
It looks like a 62/3 intake ( there is a definite step) where the runners meet the top of the manifold.
The 64 intakes don't have the definate step in that area more of a gradual transition to runners.
 
This is the only other pic I have on my phone right now. The 4 plenum holes are definitely not there... it came off a drag car.. still smells like race fuel lol.

20200130_174640.jpg
 
Last edited:
Status
Not open for further replies.
Auto Transport Service
Back
Top