Gen 1 392 in 68 b body motor mounts.

kaotickustomz · Feb 12, 2020

I've searched and searched. But all I find is some guys did the swap and pics of the engine in the bay. But I can not find any info on what they did to the motor mounts to work. Can someone tell me or show me pics of the motor mounts to put a 354/392 in a 68 b body. I have a 392 with a 671 blower and 4 speed already to go down in, but I cant figure out what to do about the mounts. And I think Mopar Charlie the one that use to make the mounts passed away . Any help would be greatly appreciated.

Hemi 354 · Feb 12, 2020

I did a similar install with my 354. Check with these guys as they have EVERYTHING re: Gen 1 Hemi's. They are in Lowgap, NC. http://www.hothemiheads.com/

kaotickustomz · Feb 12, 2020

I got everything to build my setup from them. But they don't have any motor mounts to do this type of swap .

Daliant · Feb 12, 2020

First gen Hemi's can use the same motor mounts as a small block Chrysler.

towtruckAl · Feb 12, 2020

I put a 354 in 66 or 67 sat for a customer long ago , and i used some stock mounts and only had to drill one hole , cant remember what, but they were chry oem mounts

Mopar Man 73 · Dec 25, 2020

I'm just now catching onto this thread. So how did this build go so far? I'm considering swapping out the /6 in my 4dr '63 330 for a 354 hemi I recently got.

Gen 1 392 in 68 b body motor mounts.

kaotickustomz

New Member

Hemi 354

Well-Known Member

kaotickustomz

New Member

Daliant

Well-Known Member

towtruckAl

Well-Known Member

Mopar Man 73

Well-Known Member

Similar threads