Hood Signal Wiring?

• Feb 16, 2020

• #1

dodge68charger

Well-Known Member

Local time

8:52 AM

Joined

Feb 6, 2012

Messages

1,230

Reaction score

81

Location

Washington

Just Wondering Where The Hood Signals Wire To On a 69 B Body Charger?

The Wires Go From Each Signal And Join To a Connector Which I See No Provision For.

 

• Feb 16, 2020

• #2

tnfastback

Well-Known Member

Local time

11:52 AM

Joined

Jul 4, 2016

Messages

2,667

Reaction score

6,127

Location

East Tennessee

They plug into bulk connector on firewall. There is a plug in wire that then has the 2 female connectors where the male ends off of the turn signal wires plug into.
So there are 2 wiring parts. The one off of signals and the one from bulkhead to signal wires.

 

• Feb 20, 2020

• #3

dodge68charger

Well-Known Member

Local time

8:52 AM

Joined

Feb 6, 2012

Messages

1,230

Reaction score

81

Location

Washington

Thank You

unfortunately Theres No Plug Along The Harness. I Noticed In The 68 Charger I Have, At The Bulkhead Connector Where The Turn Signal Wires Come Through The Firewall Theres A Double Set Of Wires In Each Port For The Signals.

On The 68 The Two Wires Coming Out Of Each Turn Signal Port Go Off To The Hood Light Connector..

On My 69 Charger Theres Only One Wire Coming Out Of Each Turn Signal Port

Any Idea? Thank You

 

• Feb 21, 2020

• #4

biomedtechguy

Accelerati Rapidus Maximus

FBBO Gold Member

Local time

10:52 AM

Joined

Mar 28, 2014

Messages

33,779

Reaction score

53,636

Location

South Louisiana

If the OP doesn't mind, I have a similar question about the amber hood turn signal indicators on either side of the "440" badge that faces the windshield.
See pic. The signal lamp wires are there, but I don't know where to connect them on the bulkhead wiring block. 70 Roadrunner.

 

• Feb 21, 2020

• #5

Demonic

Well-Known Member

Local time

11:52 AM

Joined

Jun 5, 2017

Messages

2,035

Reaction score

2,016

Location

Maryland

dodge68charger said:

On My 69 Charger Theres Only One Wire Coming Out Of Each Turn Signal Port

Click to expand...

The 69 harness has the splice down a few inches from the bulkhead connector. The plug for the hood harness is by the brake booster or master cylinder. The other possibility is that not all Chargers had hood indicators. You could have a blank metal plate in the hood originally. I would think the light harness would be the same.

 

• Feb 21, 2020

• #6

Demonic

Well-Known Member

Local time

11:52 AM

Joined

Jun 5, 2017

Messages

2,035

Reaction score

2,016

Location

Maryland

Comes from the bulkhead, wires are black with green and yellow tracer. The connector is just to the right as viewed, by the booster.

 

Last edited: Feb 21, 2020