SOLD BARE Hemi Heads Aluminum Keith Black

*I will get some pics later of the bare heads*
Right now I just have photos with them assembled.... Will get more pics if anyone is interested.
These heads are off of a 528 Keith Black Hemi crate, low miles.. Mopar Performance aluminum heads....
I brought them to a machine shop and they took em apart and are bare now and cleaned, ready for a valve job. Wanting to sell them though for $1600 OBO bare.

any problems with them? reason for selling? stock valve sizes?

silversedan said:

any problems with them? reason for selling? stock valve sizes?

Click to expand...

No problems with these bare heads. I took the motor apart because it had been smoking oil for a long while. This was apparently a common problem with these KB Hemis from the 90's: some had a little too much valve guide clearance/guides were too soft.

I've been wanting to buy new Edelbrock heads so that's why I'm selling. If no one is interested I can just have my machinists rebuild these. They're cleaned and ready for valves.

Mopar claims these are interchangeable with stock iron 426 heads, but here is a link to the specific details of them: https://www.summitracing.com/parts/dcc-p5153875

I see regular Mopar Performance Hemi heads on a 90's iron Mopar block, what bits are Keith Black?

Still good heads at a good price though.

TetanusShot said:

I see regular Mopar Performance Hemi heads on a 90's iron Mopar block, what bits are Keith Black?

Still good heads at a good price though.

Click to expand...

These are the same, Keith Black Hemi's from then used Mopar Hemi heads. Should've specified that !