RT K_line
Well-Known Member
Brought the R/T out the the car show and toy drive this morning in 30 degree weather. The sun is coming out now sow it might be 35 out of the wind lol.
project R/T
- Thread starter RT K_line
- Start date
RT K_line
Well-Known Member
Put my new Mickeys on to race this weekend but it was cancelled because of weather.
Mike67
Well-Known Member
Looks good RT! Have you had it down the track yet? What did it do???
- Local time
- 4:46 PM
- Joined
- Oct 16, 2014
- Messages
- 28,676
- Reaction score
- 67,490
- Location
- Salisbury, Vermont
Very nice!
RT K_line
Well-Known Member
Mike I was trying to get ready to run this weekend but the weather didn't cooperate. Hopefully next weekend I better.
Mike67
Well-Known Member
Good luck.... the car really turned out nice!!!
Winter is almost over & Spring time is about perfect in Tx...only a month or two away!
Time to start enjoying it!!!
Winter is almost over & Spring time is about perfect in Tx...only a month or two away!
Time to start enjoying it!!!
RT K_line
Well-Known Member
I finally found the pentastar I purchased, I had misplaced it. So now the last piece of the puzzle for now anyway. So it wasn't a total restoration but only repaired the body panels that needed attention so I could paint it. Now it's time to enjoy the ride and I plan to. Thanks to all the members who have given me advice, direction and/or encouragement. MOPARS RULE!!! At least in my book. Lol
- Local time
- 2:46 PM
- Joined
- May 29, 2013
- Messages
- 5,982
- Reaction score
- 11,737
Very nice, looks great. Now get out there and use it for what it was intended for!
RT K_line
Well-Known Member
AMEN to that brother!Very nice, looks great. Now get out there and use it for what it was intended for!
RT K_line
Well-Known Member
Took the R/T out for a drive, I hope the link works.
Mike67
Well-Known Member
Looks like Lackland???
RT K_line
Well-Known Member
Took the R/T out to the track to do some testing. 60ft times are better with the new taller tires but top mph and ets are slower. More bottom end tuning first then work on the top end speed and etzzz.
View attachment 20170506_213500.jpg
View attachment 20170506_213500.jpg
Last edited:
RT K_line
Well-Known Member
I found some pics of the repairs I made to the front windshield chanel before I replaced the seal and windshield. Here's a few pics if it loads them all.
RT K_line
Well-Known Member
Thi was the repair that started it all. Here it is finished. I picked up a pair of front arman rests and bases for the front but haven't mounted them yet.
Last edited:
- Local time
- 4:46 PM
- Joined
- Oct 16, 2014
- Messages
- 28,676
- Reaction score
- 67,490
- Location
- Salisbury, Vermont
looks like great job!
RT K_line
Well-Known Member
New project in the engine now. I removed the Edelbrock heads and installed a set of ported 906s with titanium retainers. All back together now and ready for a shake down run.
RT K_line
Well-Known Member
Picked up this compressor and brackets the other day. A/C coming soon I hope. Planning stages so far.
RT K_line
Well-Known Member
Looking at ac kits this winter, probably putting an under dash setup.
RT K_line
Well-Known Member
She has a new set of front tires, I went up one size to 215/60/15s. I wanted to raise the front up some. I also got in some parts to try. I want to tune it to drive more. Fun Times to come!
Going to try the duel plane intake and a 3 to 3500 stall. Removing a 4200 stall and single plane intake.
Going to try the duel plane intake and a 3 to 3500 stall. Removing a 4200 stall and single plane intake.
RT K_line
Well-Known Member
Just realized I still haven’t installed the parts I got awhile back. I was making a list of things I need for another project and remembered I needed a bathtub gasket for the intake swap. Thinking I’ll get a carb kit since it sits most of the time and questionable fuel availability.
Might be thinking about selling!
Might be thinking about selling!
Similar threads
