• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Need help

Roger63

Roger63

Well-Known Member
Local time
5:09 PM
Joined
Aug 7, 2013
Messages
5,629
Reaction score
11,103
Location
Skiatook ok
I'm working on a hydraulic clutch ,replaced the master cylinder twice. Because it wont pump up, tried reverse bleeding, nothing is working. But when you remove the new master cylinder it squirts all over the damn place.
 
If it won’t pump up then it’s passing air somewhere. That system is a slave cylinder and a mechanical bearing correct, not a hydraulic throw out bearing correct? Block off the MC and see if it bleeds down.
 
69L48Z27 said:
If it won’t pump up then it’s passing air somewhere. That system is a slave cylinder and a mechanical bearing correct, not a hydraulic throw out bearing correct? Block off the MC and see if it bleeds down.
Click to expand...
All correct its driving me nuts
 
You must log in or register to reply here.

Similar threads

Vanderstel
Rear brake bleeding
Replies
10
Views
933
Vanderstel
Vanderstel
4
HELP - ZERO BRAKES
Replies
11
Views
1K
Cranky
Cranky
Longknife
Master Cylinder Problems
Replies
3
Views
670
Dodge33
D
Jimclo2002
70 super bee brake problems
Replies
16
Views
2K
Dartman72
D
B
Bleeding new brake system
Replies
5
Views
903
Boris7K
B
Auto Transport Service
Back
Top