• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What did you do to your Mopar today?

OtOiFza.jpg


KjBRFlQ.jpg

I'm happy with it.
 
Replacing trunk extensions, rebuild l.tail assy(rusted), re-do rear lower lip on trunk lid(chrome covered all the rust!), rear quarters. Thankfully, I have other money wasting things to pass the time!!

CBEAB9C2-8512-4952-A06B-C493CE1220BC.jpeg
 
E2796CAA-47A2-40FF-B238-60334F3840D8.jpeg
3B53D859-87C6-42BD-A371-3D574E3C787A.jpeg
Thanks to a FBBO member selling me these nice sandblasted pieces, I now have them ready for the GTX, I’ll be placing the Mopar performance ones on the site for sale in a couple weeks
 
Its not my car, it is a friends and I do not think he is that "into" it. It has a 6 pack hood scoop on it which took someone a long time to install to make fit right. It appears that the hood laid on the ground or perhaps on a car wherein mice were able to get into the inner bracing and set up shop. There are a few spots where the rust came through that I have already fixed and will finish up this main part hopefully today. If this was going on a really nice car, the hood would need to be separated or more likely just replaced with a better one.
 
In reality this hood is not "horrible", it is "ok" and so long as it is on a car that sees some use and/or attention I think it will be fine in the long run, but it certainly is not perfect. I have already applied liberal amounts of rust converter inside the bracing and will get some paint onto the underside when all done, so it will live on for quite awhile yet.
 
Warm enough to get the boys out and around the neighborhood one time. Also clean the garage somewhat. Been a looong winter.

DSCN3434.JPG DSCN3435.JPG
 
Beautiful day today, but I was lazy. All I accomplished was to change the oil and filter in the Neon and wash the Challenger.
 
Put Plugs, Wires and one nasty coil in my wife's Ram 2500... 16 plugs with many different length extensions and ratchets. Wires are fun to route too. Took me about 2 1/2 hrs with hand tools. Limited cursing and 2 cuts on my hand it was back and running with-out any issues...
IMG_2348.JPG
IMG_2347.JPG
 
Replacing trunk extensions, rebuild l.tail assy(rusted), re-do rear lower lip on trunk lid(chrome covered all the rust!), rear quarters. Thankfully, I have other money wasting things to pass the time!!
Sooo now, I'm thinking that when it's moved to final "working" bay do I have enough time to pull valve covers for 'cuda chick' to get powder coat done? Looking at her chrome color; body guy said early summer so I'm hopeful to get both done. Have to call Leanne!
View attachment 919790
 
Auto Transport Service
Back
Top