WTB 71 hardware

rrTor-Red · Mar 13, 2020

Looking for original hardware screws for mounting the tail lights for a 71 RR. Repop's don't necessarily work. Thanks!

'68 Charger · Mar 13, 2020

I have some from a 73 Satellite, the black phosphate screws that secure the lens to the housings. Do you have at least one OEM screw for comparison? Mainly for length.

rrTor-Red · Mar 14, 2020

'68 Charger said:
I have some from a 73 Satellite, the black phosphate screws that secure the lens to the housings. Do you have at least one OEM screw for comparison? Mainly for length.

I do but not at home at the moment. I'm trying to get back home but with this virus stuff going on, it's making it hard o get home. I wanna say I know they're over an inch long, like 1 1/2 or 1 3/8"

SureGrip · Mar 17, 2020

rrTor-Red said:
I do but not at home at the moment. I'm trying to get back home but with this virus stuff going on, it's making it hard o get home. I wanna say I know they're over an inch long, like 1 1/2 or 1 3/8"

Are these what you need (the screws holding on the lens)?

xBpuvvdfep0LKMp9BqExiPigWBmz-eIKN34fCs6ih9MdvCJvdoSr1Wb8YMedcNkV5gG43TPpTbSEy2OqqXw=w498-h663-no.jpg

I have six that I just pulled from a 71 bumper. Send me a PM and I'll toss them in the mail to you.

If you need the tail light buckets, let me know. They are in nice shape but dirty. This bumper was on its way to the dump. This bumper also has the harness with it (However! It is cut just past where it goes through the rubber body grommet.)

rrTor-Red · Mar 17, 2020

Reply posted

WTB 71 hardware

rrTor-Red

FBBO Gold Member

'68 Charger

Well-Known Member

rrTor-Red

FBBO Gold Member

SureGrip

FBBO Gold Member

rrTor-Red

FBBO Gold Member

Similar threads