• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 68 Front wheel hub and 10" drum

Status
Not open for further replies.

RockinRachel

Active Member
Local time
7:17 AM
Joined
Mar 14, 2020
Messages
25
Reaction score
3
Location
Salt Lake City, Utah
Feedback: 0 / 0 / 0
I need a front wheel hub for my '68 Satellite. The brake drum appears to be fairly rusted to the hub, so it seems like it would be easiest to have both. I live in Salt Lake City, Utah and I have PayPal.
 
Last edited:
I have front spindles from my 69 RR they are the same and are from the drum I switched to Disk brakes awhile back. I sand blasted them clean last year and they have just been sitting in my garage. Let me know if your interested? The drums are long gone.

aHbanOr.jpg


NapGiS0.jpg
 
I need to find them but I believe I have the front drums from my coronet, since I live in on Mexico, pay for shipping only, let me know if your interested, also the front drum spindles.
 
I have front spindles from my 69 RR they are the same and are from the drum I switched to Disk brakes awhile back. I sand blasted them clean last year and they have just been sitting in my garage. Let me know if your interested? The drums are long gone.

I'm sorry, as far as I can tell my spindles are fine. It's my hub that is damaged. I took a picture and added some arrows where it is damaged:

20200315_135346-arrows.jpg
 
I need to find them but I believe I have the front drums from my coronet, since I live in on Mexico, pay for shipping only, let me know if your interested, also the front drum spindles.

Funny, now I have someone in both Canada and Mexico, with some. I believe my spindles are okay, I imagine it would be cheaper to just ship the drums.

I just went and weighed my hub and drum (they are rusted together) and they weigh 18 lbs. I tried to get an estimate from UPS and FexEx, but UPS wants a postal code and FedEx wants an address. Can you tell me your postal code and I can see if I can get an estimate from UPS?
 
Not sure what is damaged in that picture.. just looks like someone dinged it up putting the dust caps on. But if you are sure you need to replace it...

@66ChargerHI-PO ... has everything you need right here.. for a song!

https://www.forbbodiesonly.com/mopa...1969-original-front-drum-brakes-parts.189621/

You are right you can't see the damage in that picture, that was after my attempt to repair it and reassemble it. that is just where it is damaged. The repair didn't last. I don't think I have a good picture of it before.
 
60000, Uruapan, Michoacán México.

Well... I don't know, I filled in all the data in the UPS form and all the shipping options came back over $100. I don't remember them all but the one was like $143. I tried to see what it would be to send it "Freight" instead of "Package" but it wanted all sorts of information that I wasn't sure what to put, so I never got an answer. I don't know, I can't really spend $100+ right now if that's really what it would be.

I'm attempting another repair and try do it better this time. Or as someone suggested in my other thread on here, perhaps getting a sleeve machined for it could be less expensive.
 
Wow.. did you miss the link I gave you with everything for 70 bucks and possible future sales of three times that when you have used what you need!
 
[QUOTE="dadsbee, post: 911513512, member: 28641"

@66ChargerHI-PO ... has everything you need right here.. for a song[/QUOTE]

For a song aye, you think I should priced them higher? I got the original drums with the spring still around them. They were just removed, converting the car to disc. Also got the spindles, bearings, bolts, everything. They came off a 66 Charger. They could be delivered to the Carlisle Chrysler Nationals this year if you are interested
 
Wow.. did you miss the link I gave you with everything for 70 bucks and possible future sales of three times that when you have used what you need!
I saw it I'm seriously considering that, I need to find out how much shipping is. I'm on disability and it's the end of the month, I don't have $70 to spend at this moment. If shipping isn't outrageous, I will probably pick those up in April. Like you said it would be good to have extra parts on hand for future problems.
 
I saw it I'm seriously considering that, I need to find out how much shipping is. I'm on disability and it's the end of the month, I don't have $70 to spend at this moment. If shipping isn't outrageous, I will probably pick those up in April. Like you said it would be good to have extra parts on hand for future problems.

COMPLETELY OFF TOPIC: Being on disability has been... an adjustment. When I lost my job because of the MS and went on disability I have $100 less in my pocket every single day. I am extremely happy that I got disability, don't know what we would have done without it. But it is weird to think about how I would have $100 more tomorrow and if shipping was more than $30 in two days I would have another $100 and that would very likely cover shipping.
 
I saw it I'm seriously considering that, I need to find out how much shipping is. I'm on disability and it's the end of the month, I don't have $70 to spend at this moment. If shipping isn't outrageous, I will probably pick those up in April.

I am sorry to tell you this but I really do not want to ship these, it will most likely cost a fortune, be a pain in the *** to pack, and would rather have them be picked up in person to see for yourself what you are getting. If you were to go to the Carlisle Chrysler Nationals in July this year I will be there, and could deliver them there to you
 
@RockinRachel

Are you interested in the brakes and parts I have for sale? They will most likely be thrown out soon as I know longer need them, and I would hate to do that. :poke::poke:
 
Status
Not open for further replies.
Auto Transport Service
Back
Top