• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Orginal Plymouth Belvedere Gas Cap

I have this cap for my Hemi Satellite but took it off.
Put stock cap back on,was afraid someone
would like it more than me.
 
I plan on making an aircraft cable tether to keep mine with the car. I have tons of the stuff from hanging light fixtures in Kroger stores.. Lots of waste from cutting the cables. It works for various projects.
 
Never had a 66 Saty but had a II and still have a I........
 
:)Wow... lots of input...

You are right about the 1966... Thanks Guys...:thumbsup:
 
The cost of the Belvedere 2 caps you need to tether them to the car. Maybe hook up something that will sound a horn if gas cap is removed. Need an on/off switch.
 
What happened to the option of sending private messages ???? It does not appear anymore when you click on a posters registered name. I have a really nice one that I'll let go for $400.00 to either the original poster or anyone else that might need it. If you can figure out how to send me a private message let me know and if you can get through to me, I'll give you my personal email address and send you as many pictures as you want of it. Take Care, Charlie.
 
What happened to the option of sending private messages ???? It does not appear anymore when you click on a posters registered name. I have a really nice one that I'll let go for $400.00 to either the original poster or anyone else that might need it. If you can figure out how to send me a private message let me know and if you can get through to me, I'll give you my personal email address and send you as many pictures as you want of it. Take Care, Charlie.
Click avatar it says "Start a private conversation ". A little confusing.
 
The cost of the Belvedere 2 caps you need to tether them to the car. Maybe hook up something that will sound a horn if gas cap is removed. Need an on/off switch.
There’s a bolt dead center in the cap (for changing the rubber seal) I’ll use a cable or small chain attached from it down into the filler tube. I’ll probably use the #2 cap to drive around then the NOS one at shows. Anybody touches it will have a broken arm.!
 
Another good part to reproduce.
I'd like one but not for over $100.
(I'm Dutch)
 
On the subject of tethering.....

if someone trys to steal the cap they may not be aware its tethered. They uncouple the cap and it slams into the body causing a paint chip or worse.
 
I put a GTX flip cap on my 67 wagon.

It was actually the cheapest option and way less likely to be stolen.
 
My emblem fell off the faux center piece for the passenger side.. I drilled out the emblem and used a small tap and threaded some bolts into it from the reverse side. Also put red lock tight on it so it wouldn't work loose.
 
took 3 yrs to find correct one for car got lucky its original color
 
my buddy found the one I have in NC junkyard funny couldn't find one at mopar nats or any junkyard around me and wasn't going to pay ebay for an incorrect one which look a lot like a bodies
 
Auto Transport Service
Back
Top