• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Looking for a 10.5 bellhousing for a 383-440

Status
Not open for further replies.
Looking for a 10.5" bellhousing for our test stand that will bolt to a 383 - 440 block.
Hi Richard i also need a flywheel for a 69 383 roadrunner do you know what size it takes or how many teeth? Thanks
 
N
but i think your wanting a 143 tooth and bell .

We use a 130 tooth flywheel to test the B and RB engines, as long as it is 10'5" and will bolt on to a 440 were good!

The bell is only use to test fire the engines and set the timing before going to dyno.
 
Last edited:
Richard, if it is a 130 tooth flywheel/ 10.5" clutch i might have one upstairs.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top