• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Splash shield/seal in front of fender

H

Hyper Henry

Well-Known Member
Local time
12:13 PM
Joined
Aug 20, 2008
Messages
48
Reaction score
12
Location
Ontario,Canada
Got a 67 Coronet that I am working on and while cleaning up the front suspension noticed drivers side fender is missing the splash shield and seal that goes at the front of the fender around the back of headlights I believe. Are they re-popping these parts?? Or anyone have a spare for sale??

Thanks
Derrick
 
Derrick...I have seen them on the eBag repoped. If you have difficulty in locating some, I do have the material used to make them that I will let you have for the task...cr8crshr/Tuck
 
Gent's. I am working on a 66 Coronet Conv. As the enclosed picture it is clear that some "splash thing" is missing. I haven't been able to identify these parts i.e. by Classic Industries. Can anyone clarify what is missing? Greetings from a quiet Copenhagen!

20200321_161545_resized.jpg
 
Thanks for your quick reply. I have studied these parts but it appears to me they are too small to cover the gab from the back of the headlight box and i.e. the upper part of the fender. Classic industries has a set and these two parts, but I am uncertain if those are the missing parts.

The splash set:.
https://www.classicindustries.com/product/1966/dodge/coronet/parts/mb281011a.html
The splash plates RH and LH:
https://www.classicindustries.com/product/1966/dodge/coronet/parts/mm8092.html
Bo
 
I have these 2 originals with clips if someone needs them

20181126_191046.jpg 20181126_185722.jpg
 
Hi joerachet, I have these parts, but do not know how to fix them i.e. if I am missing a plate to mount them on?
 
Hey Bodk, I will take a picture of they area they mount to and post it when I get a chance.
BTW, I visited Copenhagen in 94, lovely city, great people.
 
In the attached photo, The two pieces on the right are the metal fender splash shields that go up in the headlight area. The two pieces on the left are the metal fender splash shields that go in the fenders behind the front tires. You can see the rubber seals still attached to them for installation reference. The metal shields are not reproduced. See post #7 for the rubber seals for the headlight splash shields.
20DEB85B-63F0-4D62-947B-9E39BFA1D80A.jpeg
 
Last edited:
Contact [email protected]
He was reproducing the front and back shields in fibreglass a few years ago. Possibly if there was enough interest he might do another run.
He also repopped 66-67 Charger stuff, and 66-67 b body things.
 
440 4 speed said:
Contact [email protected]
He was reproducing the front and back shields in fibreglass a few years ago. Possibly if there was enough interest he might do another run.
He also repopped 66-67 Charger stuff, and 66-67 b body things.
Click to expand...
Not sure if this is where I purchased them ( its been 20 years) but I used the rear fiberglass ones in my car.. Slick deal, NO rusting, fit and look good...

DSCF0158.JPG
 
You must log in or register to reply here.

Similar threads

BigFlo
  • Locked
FOR SALE 65 Belvedere Fender Splash Shields
Replies
0
Views
437
BigFlo
BigFlo
Plumcrazy
  • Locked
WTB Splash shield for 70 Charger
Replies
4
Views
627
Plumcrazy
Plumcrazy
1MYTGTX
1967 Belvedere GTX front fender lower hole
Replies
3
Views
346
eldubb440
eldubb440
dan juhasz
  • Locked
WTB 67 Belvedere splash shields
Replies
8
Views
780
davek
davek
R
  • Locked
SOLD 1968-70 B Body inner fender splash shield mounting clips
Replies
0
Views
427
robert horman
R
Auto Transport Service
Back
Top