• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

installing 6 pak intake

davek

FBBO Gold Member
FBBO Gold Member
Local time
6:39 AM
Joined
Oct 14, 2017
Messages
9,416
Reaction score
11,534
Location
columbia SC
So I plan on installing my edlebrock intake. Its been a while. I believe valley pan sealed at the 2 bars and black rtv on corners. Do I use sealer around the ports? Thanks Dave
 
Always a good idea. I do a thin coat after checking the alignment.
 
I like Permatex HighTack (brush on) around the intake ports, both sides (on the raised bead) and Permatex Black on the corners as noted previously. Just my opinion of course.
BOB RENTON
 
I like Permatex HighTack (brush on) around the intake ports, both sides (on the raised bead) and Permatex Black on the corners as noted previously. Just my opinion of course.
BOB RENTON
But it works for you right? Then it must be OK then.
:thumbsup:
 
Auto Transport Service
Back
Top