• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 1966 Belvedere Dash Part.

Status
Not open for further replies.

BeepBeepRR

Well-Known Member
Local time
2:48 PM
Joined
Oct 16, 2016
Messages
9,578
Reaction score
14,961
Location
Atlanta,Ga
Feedback: 16 / 0 / 0
Looking for the driver side piece of chrome for around the dash. Doesnt have to be perfect Just needs to not have rust holes through it. Here is a picture of the part I need. I am in the process of pulling the dash and would love to have this piece before I get ready to put it back in.

IMG_3247[1].JPG
 
Looking for the driver side piece of chrome for around the dash. Doesnt have to be perfect Just needs to not have rust holes through it. Here is a picture of the part I need. I am in the process of pulling the dash and would love to have this piece before I get ready to put it back in.

View attachment 935584
 
dug this trim up from my 67 stash. One little rust hole

66 dash trim.jpg
 
I only need the driver side.. I know it sucks to break up a set... Another guy said he had one.. If he doesnt work out let me know what you want for the driver side..
 
Do those 67's fit 66 because of steering column differences? Just thought I'd mention it.
 
the side is the same. It is the lenght of the lower horizontal that differs
 
66 and 67 are different lengths because the 67 steering column is fatter than the 66 and the plymouth and dodge are different also,the plymouth radio sits down on the trim so it has a cutout for it the dodge radio sits higher in the dash and no notch.I bought a complete set from Tonys Mopar parts and luckily took my originals with me because the set he had pulled were from a dodge and looked the same but did not have the notch for the radio,they looked the right length until I got them home and they were too short,found out they were from a 67.
 
Looking for the driver side piece of chrome for around the dash. Doesnt have to be perfect Just needs to not have rust holes through it. Here is a picture of the part I need. I am in the process of pulling the dash and would love to have this piece before I get ready to put it back in.

View attachment 935584


I have miscellaneous pieces see attached pic let me know if need any

1E50E6CE-7C99-4C44-9DC3-67EA1656F4E0.jpeg
 
That piece just below the steering column chrome. Its the driver side corner chrome.
 
Can you take a closer picture of it? Mine has a rust hole all the way through it. Thanks..
 
I believe that is the passenger side. The short part of it should be towards the outer part of the dash and going up. The longer part with the extension piece goes towards the column. In the picture below the short part that has the extension piece on it goes towards the column the part with the rounded off end goes up. I'm pretty sure our pictures are of the passenger side.

img_3247-1-jpg.jpg
 
I believe that is the passenger side. The short part of it should be towards the outer part of the dash and going up. The longer part with the extension piece goes towards the column. In the picture below the short part that has the extension piece on it goes towards the column the part with the rounded off end goes up. I'm pretty sure our pictures are of the passenger side.

View attachment 942459
Look to right of piece there is 2 pieces

CF0E899B-B6A7-42B7-92ED-4FF7311FA81C.jpeg
 
Status
Not open for further replies.
Auto Transport Service
Back
Top