70 Roadrunner hood pins

NIN900RR · May 5, 2020

Hey guys,

Installing my hood pins on my 70 roadrunner could someone give me photos of were they are suppose to go if it came from the factory. I want to make sure I put the cables in the same place as the factory.

thanks

JB

JimCoronette · May 5, 2020

There are holes on the bottom side of the hood. The pin replaces one of the fender bolts.

Hopefully dadsbee will chime in with a link to his detailed resto guide.

NIN900RR · May 5, 2020

JimCoronette said:
There are holes on the bottom side of the hood. The pin replaces one of the fender bolts.

Hopefully dadsbee will chime in with a link to his detailed resto guide.

Thanks Jim,

I am looking for where the cables get screwed in as well.

6PKRTSE · May 5, 2020

My factory paint project 70' R.R.

NIN900RR · May 5, 2020

6PKRTSE said:
My factory paint project 70' R.R.

View attachment 945971

6PKRTSE,

Did you attach any information or is this just a picture of your project?

6PKRTSE · May 5, 2020

It's a picture of just showing the location of the hood pins.

JimCoronette · May 5, 2020

There should be a dimple where the hole should be drilled.

dadsbee · May 5, 2020

JimCoronette said:
There are holes on the bottom side of the hood. The pin replaces one of the fender bolts.

Hopefully dadsbee will chime in with a link to his detailed resto guide.

LOL Jim, I had my metal guy weld the holes back up, that I'd put there as a young man, as pins just don't look right on a '69 Ramcharger hood. Wayne

6PKRTSE · May 5, 2020

I think look okay on 68 and 69 cars as long as they are put in the right location. Seems most are too far inboard and don't look right.

70 Roadrunner hood pins

NIN900RR

Well-Known Member

JimCoronette

Well-Known Member

NIN900RR

Well-Known Member

6PKRTSE

Well-Known Member

NIN900RR

Well-Known Member

6PKRTSE

Well-Known Member

JimCoronette

Well-Known Member

dadsbee

FBBO Gold Member

6PKRTSE

Well-Known Member

Similar threads