• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 14x 5.5 polished (shiny) trim ring pair

Status
Not open for further replies.

YY1

Well-Known Member
Local time
2:23 AM
Joined
Jun 26, 2010
Messages
26,395
Reaction score
22,558
Location
FL
Feedback: 2 / 0 / 0
Looking for a pair of 14 inch trim rings that reflect the holes in the rallye wheels.

I currently have polished 15" on the rear and brushed 14" on the front.

I'd like them to match and really like the polished look.

I only need a pair and they don't need to be absolutely perfect, but not beat up with big scratches/dents.

I'd consider a set of 4 if the money is right.

I'll also be thankful of any links to new ones that fit and aren't $100 each and only sold in sets of 4.


Thanks, FxBO.
 
try Amazon. I got 4 14 inch stainless for under 40 dollars
 
The other issue I'm having is that I know a 5 inch ring is not deep enough and a 6 inch ring will not physically fit.

The depth measurements on all I've checked do not say if the depth is measured on the angle of the ring of from the edge to a flat surface (straight measurement).
 
...and this is why I'm asking here-

Researching the Coker Tire/Specialty Wheel ring that is advertised on Amazon yields conflicting information on both the fit and the finish.
The finish is not defined in their listing. Only "stainless".

In the questions list, one question is answered that they are reflective and another is answere that they are brushed. Come on Coker, which one is it? Can't be both. You would think that would be a common question and being in that business they would know.

Also several questions asked about fit to Mopar 14x6 wheels. The response, even though a 2 1/4 depth is specified is that they are made for their 14x7 and 14x8 Mopar and pontiac rally wheels and that they should fit 14x6 but is not guaranteed.

Those answers are certainly NOT helping persuade me to purchase their product.

Has anyone here bought Coker sku 3010 and can verify that

A- it is reflective or brushed and

B- if it fits a 5.5 inch rally wheel?
 
14 inch rings...

14inch)$150(.jpg.jpg 14inch($150).jpg.jpg
 
Here are the 15s-

20200520_194327.jpg


I only had time to wipe off the top left portion.

You can see the ring doesn't go all the way to the wheel center, but...

20200520_194334.jpg


it lines up perfectly with the outer shell/hoop.

I think they are 15x6 rings but not Mopar.

Not real sure though, they fit pretty darn good.

rings for x6.5 rallyes are super hard to find.
 
I'm not sure these are genuine Mopar or not. Of the 4 ralleyes that came on my car, 2 are brushed & 2 are shiney so its anyones guess, but they do fit nicer to the inner rim near the holes than the 15" ones in the previous post.. These are 14".
0523200741a.jpg
0523200741.jpg
0523200742a.jpg
0523200746.jpg
 
Now those are the ones I used to have , 3-4 years ago. At that time , they offered them in 14 and 15 inch , at a fair price. Then the pics went way up , then you couldn't get them. Figures , I sold a lot of them.
PS. They are aftermarket.

Frank
 
I think you are right, yours appear a bit more mirror like.

20200530_121727.jpg
 
However, this is how one arrived-

20200530_121026.jpg
 
Are you sure the box was not damaged , I mean it would take a lot of force to do that. Especially in that small area , I had that one on a wheel and took it off just before I sent it too you. Now that really puzzles me... Do you think its fixable , if not I will send you the other one.

Frank
 
Status
Not open for further replies.
Auto Transport Service
Back
Top