• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 440 tunnel ram with carbs

Status
Not open for further replies.

351turbo

Member
Local time
4:24 AM
Joined
Apr 22, 2020
Messages
24
Reaction score
11
Location
Canada
Feedback: 0 / 0 / 0
Contact seller
I have a NEW never install Weiand intake and carbs . The carbs are 450 cfm each . They are perfect condition and have fuel line with gauge . This set up is over ready to install. I can ship anywhere .....$925 , thank you

20200420_201617.jpg 20200420_201629.jpg 20200420_201650.jpg 20200420_201647.jpg 20200420_201644.jpg 20200420_201632.jpg
 
Will this one fit 383 b block?
Sorry but if u don't know the answer to that question, maybe you aught to think twice about trying to run a tunnel. U might hurt yourself or your ride.
No it won't fit !
Now I have heard of an adapter that converts low deck to raised deck. But I never owned one. Good luck, C
 
Sorry but if u don't know the answer to that question, maybe you aught to think twice about trying to run a tunnel. U might hurt yourself or your ride.
No it won't fit !
Now I have heard of an adapter that converts low deck to raised deck. But I never owned one. Good luck, C
Fair answer to stupid question. I have realized that after i have asked during research.
 
Not technically related but I had a similar setup for a 440,but it had 660 carbs. I told a guy who had a 440 powered 73 Fury that I was selling my tunnel ram intake manifold and carbs. He said that it would not fit his 440,because his was a special police 440,and his 440 was bigger than my 440. I laughed and told him that I would bet him hundred dollars it would bolt right on,he would not take the bet. He said that he tried another intake manifold and it fell right into the valley of his special police 440 engine. I laughed at him,and told him that he must have tried to put a B engine low deck manifold on his 440! He refused to believe what I was telling him, so I just laughed and walked away! There are all kinds out there,so make sure that your buyer knows the difference between a B engine and an RB engine! Good luck with the sale.
 
Not technically related but I had a similar setup for a 440,but it had 660 carbs. I told a guy who had a 440 powered 73 Fury that I was selling my tunnel ram intake manifold and carbs. He said that it would not fit his 440,because his was a special police 440,and his 440 was bigger than my 440. I laughed and told him that I would bet him hundred dollars it would bolt right on,he would not take the bet. He said that he tried another intake manifold and it fell right into the valley of his special police 440 engine. I laughed at him,and told him that he must have tried to put a B engine low deck manifold on his 440! He refused to believe what I was telling him, so I just laughed and walked away! There are all kinds out there,so make sure that your buyer knows the difference between a B engine and an RB engine! Good luck with the sale.
I remember reading the technical questions in Hot Rod magazine back in the late 60's. The question was "Can I put a big block cam in my small block?" The answer was great! "Sure, if you break it in half and pit it in the pan." I still laugh.
 
If it was Hot Rod Magazine, it was probably a bow tie guy. That rag was disgustedly full of them.
EDIT. Opps, I think I am not to be making discussion on a ''For Sale'' post.
 
Sorry but if u don't know the answer to that question, maybe you aught to think twice about trying to run a tunnel. U might hurt yourself or your ride.
No it won't fit !
Now I have heard of an adapter that converts low deck to raised deck. But I never owned one. Good luck, C
That is a good answer and funny also. They should appreciate the humor! Hahahha
 
Status
Not open for further replies.
Auto Transport Service
Back
Top