jenkins71
Well-Known Member
Contact seller
I have a 3 year old Borgeson Steering Box, in very good condition, that I'm looking to sell.
I put it in my Dodge Van, ran it for a couple years, and believe it or not ended up missing the finger-light touch of the factory box. Held on to it thinking I would use it for a future hot rod project, but I don't think it's gonna happen for me.
The box is this one: https://www.summitracing.com/parts/BRG-800127
It fits all Mopars with a 1-1/4" sector shaft.
New is $567.
Used, very good condition from me:
$400 + shipping (or local pickup), firm.
I also have for sale the necessary adapters to make the Borgeson Box mate up with a Saginaw pump. This is the kit: https://www.summitracing.com/parts/BRG-925113. I also have the brass nipple adapter that go with it, (you need them) that I'll throw in with the hoses: https://www.summitracing.com/parts/BRG-925122
New, the total for this set goes for $85 + shipping
Used, very good condition from me:
$40 + shipping, firm.
I also have the Borgeson-style U-joint: https://www.summitracing.com/parts/BRG-036425.
Mine is welded to the factory column extension from the dodge van it was installed on, but is otherwise good. It would be pretty simple to cut the weld off and use the U-joint on an A-, B-, E- column. You could either weld it on, or drill your column and drive pins through the holes in the input area. I would just follow the Borgeson instructions.
These are $122 new.
Selling mine for $50 + shipping, firm.
If you want the entire kit, I can sell everything as a set for $450.
I'm pretty firm on my prices because I think this is a good value. If you bought my set, you would save more than $300 over new. Not to mention, no tax.
We will have to figure out shipping, or you can pick it up from my garage in Woodside, NY 11377 (Queens, NYC)
I put it in my Dodge Van, ran it for a couple years, and believe it or not ended up missing the finger-light touch of the factory box. Held on to it thinking I would use it for a future hot rod project, but I don't think it's gonna happen for me.
The box is this one: https://www.summitracing.com/parts/BRG-800127
It fits all Mopars with a 1-1/4" sector shaft.
New is $567.
Used, very good condition from me:
$400 + shipping (or local pickup), firm.
I also have for sale the necessary adapters to make the Borgeson Box mate up with a Saginaw pump. This is the kit: https://www.summitracing.com/parts/BRG-925113. I also have the brass nipple adapter that go with it, (you need them) that I'll throw in with the hoses: https://www.summitracing.com/parts/BRG-925122
New, the total for this set goes for $85 + shipping
Used, very good condition from me:
$40 + shipping, firm.
I also have the Borgeson-style U-joint: https://www.summitracing.com/parts/BRG-036425.
Mine is welded to the factory column extension from the dodge van it was installed on, but is otherwise good. It would be pretty simple to cut the weld off and use the U-joint on an A-, B-, E- column. You could either weld it on, or drill your column and drive pins through the holes in the input area. I would just follow the Borgeson instructions.
These are $122 new.
Selling mine for $50 + shipping, firm.
If you want the entire kit, I can sell everything as a set for $450.
I'm pretty firm on my prices because I think this is a good value. If you bought my set, you would save more than $300 over new. Not to mention, no tax.
We will have to figure out shipping, or you can pick it up from my garage in Woodside, NY 11377 (Queens, NYC)
Last edited: