hemillama
Active Member
Where can I find these guides? Year One send some they were below standard of the normal any other suggestions?
1969 Road Runner window help!
- Thread starter hemillama
- Start date
69hemibeep
Well-Known Member
I got a couple from a dealership a few years ago
BLK 68 R/T
Well-Known Member
Good luck. The real ones have been discontinued. Only those crappy aftermarket ones exist now unless you pony up some big bucks for some real Chrysler ones.
hemillama
Active Member
Where does one find those?
If you are using reproduction glass, it is a bit thicker and makes using the reproduction slides that much more difficult to use. The reproduction slides can be used, but it is best to modify them slightly to remove a portion of the "wings" on each side of the primary channel. Also, reuse the original "H-Pins" or sand the sharp corners down on the reproduction "H-Pins". There are numerous post on the installation of these pieces on this and other forums.
If your very lucky and keep your eyes open, you can sometimes stumble across one of the factory Chrysler channels. Most people who have the originals will be getting stupid money for them. With that said, I have both available.
If your very lucky and keep your eyes open, you can sometimes stumble across one of the factory Chrysler channels. Most people who have the originals will be getting stupid money for them. With that said, I have both available.
hemillama
Active Member
Interested in your offer not sure how to conduct business on the site? Email? Phone? PM?
@hemillama I have sent you a private message
65pacecar
Well-Known Member
Check out Steele Rubber, they probably have them and likely better quality than Year One, if not they may be interested in making them if you have a good sample for them to use.
Similar threads
- Locked
