Paul_G
Well-Known Member
- Local time
- 4:54 PM
- Joined
- Dec 24, 2013
- Messages
- 2,098
- Reaction score
- 3,364
- Location
- Surprise, Arizona
I got a pair from Summit this week. The older cast bog block Mopar Performance valve covers are no longer produced which is a shame.
The bolt holes had to be opened up to fit. Had to move the lip out a bit in a few places to get over the gasket. Then after snugging it down I see this. The upper part of the cover warped so bad I can reach in and move the gasket around. That was about .070" of feeler gauge in there with room to spare. The other cover was not as bad, but still unusable.
The bolt holes had to be opened up to fit. Had to move the lip out a bit in a few places to get over the gasket. Then after snugging it down I see this. The upper part of the cover warped so bad I can reach in and move the gasket around. That was about .070" of feeler gauge in there with room to spare. The other cover was not as bad, but still unusable.