• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Eldelbrock performer RPM intake for 383

Status
Not open for further replies.
Burns69RT

Burns69RT

Well-Known Member
Local time
1:59 AM
Joined
May 3, 2015
Messages
479
Reaction score
225
Location
Orange County, CA
Feedback: 0 / 0 / 0
Hey guys, I’m looking for a performer RPM intake manifold for a 383. I really appreciate it guys, thanks Jon
 
Let me know if you find TWO, I'll take one as well!
 
One of the most difficult intakes to find used.

I've been looking for years and finally settled on the similar Weiand 8008.

Also not super easy to find but in my case easier than the RPM.
 
YY1 said:
One of the most difficult intakes to find used.

I've been looking for years and finally settled on the similar Weiand 8008.

Also not super easy to find but in my case easier than the RPM.
Click to expand...

That is because once you bolt one on, you will never take it off haha!:D I run one on my 440 and it is a monster and the best intake on the Dyno for street applications.
 
That $300-$350 price is what's killing me.

My barely used 8008 was $100 (with almost the same flow spec as the RPM), and my Torker 383 was $75.

I had an RPM lined up and paid for at $125 plus $50 to ship but it got lost in the mail.
The tracking said it left the facility, then went back in to the same facility and was never seen again.
I did get a refund and I assume the seller got one as well.
 
YY1 said:
That $300-$350 price is what's killing me.

My barely used 8008 was $100 (with almost the same flow spec as the RPM), and my Torker 383 was $75.

I had an RPM lined up and paid for at $125 plus $50 to ship but it got lost in the mail.
The tracking said it left the facility, then went back in to the same facility and was never seen again.
I did get a refund and I assume the seller got one as well.
Click to expand...

Don't ya love that ****......an intake is such a small piece to lose too and just vanish......assclowns :rolleyes::rolleyes::D
 
91r/t said:
That is because once you bolt one on, you will never take it off haha!:D I run one on my 440 and it is a monster and the best intake on the Dyno for street applications.
Click to expand...
Yeah I ran one on a 440 in my old 70 roadrunner. Now I want to run one for my 69 runner
 
I have one new in the box I’ve had for at least 15 yeas but gonna use it one day on a future build.
 
Pm sent ....no response on my 383 performer...pics also sent
 
Status
Not open for further replies.

Similar threads

davek
  • Locked
WTB la 318 dual plane intake
Replies
1
Views
585
Sam69sat
S
69ChargerR/TSE
  • Locked
SOLD Edelbrock RB P/N 7193 Performer RPM NEW
Replies
1
Views
853
69ChargerR/TSE
69ChargerR/TSE
scot340
  • Locked
FOUND 340 Intake and Exhaust manifolds
Replies
3
Views
565
72 BLUE 400
72 BLUE 400
Shaneoer
  • Locked
FOUND Wanted factory 383 2x4 intake
Replies
1
Views
510
RemCharger
RemCharger
Eric Pearson
  • Locked
FOUND Valve covers
Replies
1
Views
555
Spare Parts
Spare Parts
Auto Transport Service
Back
Top