• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

oil pan

RSZ28

Well-Known Member
Local time
6:12 AM
Joined
Oct 9, 2013
Messages
245
Reaction score
85
Location
Brownsville, PA
Did all 65 B body big block oil pans have a baffle? I have two pans that supposedly are for a 64/65 big block engine. Neither has any number on them or a baffle. Also, pick ups are straight with no curve to fit the baffle. Thanks
 
Did all 65 B body big block oil pans have a baffle? I have two pans that supposedly are for a 64/65 big block engine. Neither has any number on them or a baffle. Also, pick ups are straight with no curve to fit the baffle. Thanks
My 65 383 had the same style pan and pick up tube.
 
Near the bottom of the pan is a built in baffle with a hole in it for dipstick. The pick up also had a curve in it to fit an indentation in baffle. I don't know if this setup was for early or late pans. My pans look like pictures of 65 pans, but without baffle and curved pick up.
 
Baffle? Do you mean windage tray?

No, I think he means baffle.

I'm not sure when and for what application they were installed. At some point, I think that all pans had baffles. The baffled 402 pan was used in 67.
 
Auto Transport Service
Back
Top