• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Floor pan wire tab question

Durandal25

Well-Known Member
Local time
3:53 AM
Joined
Aug 29, 2011
Messages
3,219
Reaction score
3,329
Location
Texas
Team,

Silly question, but what do you call the tabs that screw to the floor pan that holds wire harness......the ones that run under the seats.....bendable....
 
I call them tabs too. Also, they were spot welded to the floor pans at the factory, not screwed down.

I had to remove my wire harness 'chases' when I redid my floorpans. To reinstall the chases and tabs to the new floor I drilled a hole thru the tabs and the floor and then plug welded them. :)
 
I call them tabs too. Also, they were spot welded to the floor pans at the factory, not screwed down.

I had to remove my wire harness 'chases' when I redid my floorpans. To reinstall the chases and tabs to the new floor I drilled a hole thru the tabs and the floor and then plug welded them. :)
....on my 67, they were screwed......but who makes them?
 
I haven't seen those reproduced. Same for the tabs under the hood that fold over to hold our wiring harnesses in place. As far as I know those tabs have to come from a donor car.

I can't speak for the 67 model year but in 64 my tabs on the floorpans and in the engine compartment were spot welded.
 
I haven't looked to see if they sell them separately, but one was included with the AMD floor I ordered.
I didn't get one with the half pan I ordered.....from AMD. I wonder If I call them.....
 
Auto Transport Service
Back
Top