• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1965 Belvedere Fender Install.

493 Mike

FBBO Gold Member
FBBO Gold Member
Local time
6:24 PM
Joined
Dec 25, 2011
Messages
5,207
Reaction score
6,250
Location
White Cloud, MI
Hi fellas,
It's been almost 11 years since disassembly and I've lost many brain cells in that time so, are there 2 studs used during each fender installation? I bagged up 2 per fender with 2 large washers (captive) on 5/16" nuts. I know one installs bottom rear into a large U-nut. Where should the other one install?
Also having some trouble with 2-5/16 X 1 1/2" cap screws with large captive washers?
I would appreciate any help! Thanks!
Mike
 
Mike, won't get to it till tomorrow but I will look on mine as it is in storage.
 
Ok, Looks like the bolts with the large washers are top of the fender near the cowl.
The studs are the bottom of the fenders and inside corner near rad support.
Small washer bolts along top of the fender.
IMG_2951.jpg
IMG_2952.jpg
IMG_2955.jpg IMG_2957.jpg IMG_2958.jpg IMG_2960.jpg
 
No Problem. That's what we do here !
 
Auto Transport Service
Back
Top