westie47
Well-Known Member
What’s the beat way to fix these post backers on the console woodgrain panels? Can I solder them or do they need to be welded?
More console questions....
- Thread starter westie47
- Start date
BeepBeepRR
Well-Known Member
I think the material is die cast. Kind of like hotwheels. Id say soldier would work better I think welds would melt it.
Are you going to put new wood grain sticker on it. If so then would drill the plate and put new metal peg's on it. Then could use a tig welder.
- Local time
- 6:42 PM
- Joined
- Oct 20, 2019
- Messages
- 3,497
- Reaction score
- 2,657
- Location
- Saskatoon Saskatchewan Canada
I think epoxy might work also. I am thinking of getting the absolutely flat headed bolts, extremely thin head. Then epoxy that to the top.
westie47
Well-Known Member
Yes I’m going to order the vinyl overlay. I don’t want to buy the whole panel.
Just to add Eazy weld sell some good rod's for cast and pop metal. Just used some on the bell housing. You might try them they have a rod for every thing.
westie47
Well-Known Member
Which bolts are those?
westie47
Well-Known Member
Is that for use with a MIG?
- Local time
- 6:42 PM
- Joined
- Oct 20, 2019
- Messages
- 3,497
- Reaction score
- 2,657
- Location
- Saskatoon Saskatchewan Canada
Hard to explain, but the head is no more than 1/8 of an inch thick, and quite large. Not sure, but might possibly be used in wood working. Maybe I can take a picture and post it, no guarantee.
Similar threads
