• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Need a replacement hub!!

1966XP29

Member
Local time
4:56 PM
Joined
Jun 21, 2020
Messages
10
Reaction score
0
Location
Long Island
I spun a bearing race on my front 10in drum hub! I'm pretty sure a new bearing/race set will be a waste of time and money! A quick search indicates that I might be sh*t out of luck in finding a replacement hub. What are my options here, anyone run into this situation?

IMG_2335.jpg
 
I have a set out on my old K-frame not sure on the condition. Its a 1966 Front end. Let me know if you are interested.
 
There should be plenty of good used ones around, with the advent of replacing with disc sets. Try posting a WTB ad, and see what's available. Post your year & model for a correct match...
 
I spun the outer race in my front rotor many years ago - before repops were available and good used ones were hard to find. I was able to save it by having a machine shop bore it out and put in an insert. Been working like that going on 30 yrs. Just an option...
 
I have a couple but shipping would likely be high.
PM me and I'll see if I can help.
 
I have a couple but shipping would likely be high.
PM me and I'll see if I can help.
I shipped a hub in a USPS flaterate box recently to a member in a southern state. Don’t recall, Texas, Louisiana, maybe? Cost was less than $20.
 
That's a good question, need to clean up the spindle and take a good look. Any sort of a groove is bad, correct? The machine shop is an interesting solution. I wonder if that's something they do frequently, I'll investigate after the weekend, if that doesn't pan out I'll PM the guys with the extra hubs. Thanks very much, feeling better about this mess now.
 
Start a wanted thread. That's how we do it here.
 
Auto Transport Service
Back
Top