• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Drive shaft

Status
Not open for further replies.
cheeseburgerhead69

cheeseburgerhead69

Well-Known Member
Local time
7:03 AM
Joined
Nov 16, 2010
Messages
198
Reaction score
97
Location
nebraska
Feedback: 1 / 0 / 0
Ok Guys, I've got a 62 Plymouth Belevedere, it's has a 1967 727, and a small yoke 8 3/4.... I need a drive shaft to get it on the road.... 53 1/2 inches center to center, by my measurement, maybe 53 would work. l've got a front yoke just need the drive shaft.... HELP ANYBODY !!
 
cheeseburgerhead69 said:
Ok Guys, I've got a 62 Plymouth Belevedere, it's has a 1967 727, and a small yoke 8 3/4.... I need a drive shaft to get it on the road.... 53 1/2 inches center to center, by my measurement, maybe 53 would work. l've got a front yoke just need the drive shaft.... HELP ANYBODY !!
Click to expand...
Be sure that you measure with the yoke in the trans the right distance. I would have to check again with the person who knew how to measure it. To far in or to far out is not good. My 63 wagon measures 52" center to center with a 727 and my friends 64 2 door is 52" also. I could check with him as to how to measure the proper shaft length.Depending on the spline count of your 8 3/4 you could go to the large u-joint. Got all kinds of those yokes laying around. Can change that yoke easy. Good luck.
 
Dennys Driveshafts has all the correct ways to measure on their site.
 
I slid the yoke in and left about an inch and half for travel... then measured to the center of the rear yoke. The Service Manual specs say 53.67 " That said original equipment would have been trunion style.
 
We've got a pile of them at the shop in eastern iowa, I'll be back there in 2 weeks I can check
 
furious70 said:
We've got a pile of them at the shop in eastern iowa, I'll be back there in 2 weeks I can check
Click to expand...
Thank- you in advance, really close to getting this 62 running... hasn't been on the strip in over nearly 40 years !! Please let me know when you can !!
 
I have a driveshaft that measures 54" center of u-joint cap to center of u-joint cap.
It has the 7260 style smaller 3" u-joints front and rear.
Currently there is a 904 trans yoke up front.
I am asking $100.00 plus shipping for the unit.
If interested start a conversation with your zip so I can quote shipping from northwest Indiana.
Thanks!

IMG_7533.JPG IMG_7534.JPG IMG_7535.JPG
 
Mopar John said:
I have a driveshaft that measures 54" center of u-joint cap to center of u-joint cap.
It has the 7260 style smaller 3" u-joints front and rear.
Currently there is a 904 trans yoke up front.
I am asking $100.00 plus shipping for the unit.
If interested start a conversation with your zip so I can quote shipping from northwest Indiana.
Thanks!

View attachment 989032 View attachment 989033 View attachment 989034
Click to expand...
Thank you sir, but that's just a little too long. 53 1/2 is ideal, I would have to cut that one down to fit. if I can't find anything else I will get a hold of you.
 
I may have one will look tomrorow
 
I've got 2 big yoke a 53 5/8 or 3/4, and a small yoke at 53 even. Surely 1/4" fits

20200822_204213.jpg
 
Status
Not open for further replies.

Similar threads

3white74
  • Locked
FOR SALE B body Dodge drive shaft
Replies
6
Views
1K
3white74
3white74
M
  • Locked
FOR SALE b body drive shaft
Replies
0
Views
527
moparraceman
M
Joe Jacalone
  • Locked
WTB Drive shaft
Replies
4
Views
969
Smokinnjokin
Smokinnjokin
jprather
u joint question - 72 satty
Replies
6
Views
532
#41
#41
TopBanana72
Drive shaft What's this?
Replies
7
Views
799
69sunfireGTX
69sunfireGTX
Auto Transport Service
Back
Top