• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

removing door glass procedure ?

dan juhasz

FBBO Gold Member
FBBO Gold Member
Local time
3:59 PM
Joined
Aug 5, 2016
Messages
1,680
Reaction score
1,934
Location
Whiting NJ
Must be an easy way, 67 Coronet, what is the procedure to remove the door glass and vent window assembly. The glass slides in the vent window drop down channel, it seems secure cant just dislodge it from the channel. The rubber corner piece on top of the vent prevents you from sliding the glass straight up. Whats the secrets?
Dan
 
Take the screw out of the rubber block (unless '67 is different than '68/69/70) but I highly suggest that you remove the entire assembly as an assembly, then put it all together to put back in as an assembly.
beerestoration2019 2915.JPG
 
Take the screw out of the rubber block (unless '67 is different than '68/69/70) but I highly suggest that you remove the entire assembly as an assembly, then put it all together to put back in as an assembly.
Thats the way I ended up doing it , I just couldn't believe that was correct
 
Thats the way I ended up doing it , I just couldn't believe that was correct

They are a PIA for sure. I also have removed the upper trim piece so I could slide the glass up and out of the A-Frame (on a '68).
 
Auto Transport Service
Back
Top