White wires in instrument harness ID needed

Moparfiend · Aug 20, 2020

So I have identified every wire on my 1970 instrument harness but 3 wires all the same circuit/node. The wires are all white and are identified below. Does anyone know what circuit these are associated with? The only white wires I see on the schematic is the stop brake and wiper switch.

JimKueneman · Aug 20, 2020

Ron most of the time the wiring diagrams for “accessory add ons” are documented in the service manual. This is likely maybe a clock or something.

Moparfiend · Aug 20, 2020

JimKueneman said:
Ron most of the time the wiring diagrams for “accessory add ons” are documented in the service manual. This is likely maybe a clock or something.

Thanks Jim yeah I was thinking radio or some other accessory however I didn’t see it on either the Instrument or Accessory schematics as its part of the factory harness.

JimKueneman · Aug 20, 2020

Moparfeind said:
Thanks Jim yeah I was thinking radio or some other accessory however I didn’t see it on either the Instrument or Accessory schematics as its part of the factory harness.

Is it one circuit connected to that eyelet? Almost seems like it would be ground.

Moparfiend · Aug 20, 2020

JimKueneman said:
Is it one circuit connected to that eyelet? Almost seems like it would be ground.

Its all one node yes....continuity to all three locations. Can’t seem to find continuity anywhere else in the harness.

White wires in instrument harness ID needed

Moparfiend

FBBO Gold Member

JimKueneman

Well-Known Member

Moparfiend

FBBO Gold Member

JimKueneman

Well-Known Member

Moparfiend

FBBO Gold Member

Similar threads