63 fury bm deep trans pan

63fury500 said:

• 
  car is on jack stands on the frame,car has the conversion trans mount form joe suchy,all correct trans crossmember,have not looked at it on the ground yet,didnt think it would make a difference if it was down or not but I dontknow
  

Click to expand...

dvw said:

It's not the pan (though the engine trans do lay down about 1 degree to the rear). Its an optical illusion. It's the headers pointing down. Compare to the frame rail. And yes up to 65 have a rear pump. Thus a 2nd hole in the filter for the rear pump feed.
Doug

Click to expand...

khryslerkid said:

OP has two threads going here on this issue...

https://www.forbbodiesonly.com/moparforum/threads/tranny-mounts-strange.201424/
View attachment 997842

Click to expand...

VANDAN said:

Here's a few pics of my '63 mount, original from a Dodge 330, not sure if they'll help...View attachment 997851 View attachment 997852 View attachment 997854

Click to expand...

khryslerkid said:

OP has two threads going here on this issue...

https://www.forbbodiesonly.com/moparforum/threads/tranny-mounts-strange.201424/

Is your left header bolted up in this picture? What brand headers are they?
View attachment 997842

Click to expand...