67' B body throttle cables?
- Thread starter Auggie56
- Start date
R413
Well-Known Member
They are not The same length and nothing will work but the correct hemi one. I had it sent 2nd day air And didn’t measure it.
Hemi is shorter. The long ones will not fit.
the hemi is shorter because of where the primary carb is, it to the rear of the engine. So is the bracket. And the head is very close to the firewall, no room to loop that long cable.
I tried to make others work and they were not.
bought the correct cable and $100 bux later it’s all done just like that.
here is a measurement chart, click the chart.
https://www.manciniracing.com/marathca.html
Hemi is shorter. The long ones will not fit.
the hemi is shorter because of where the primary carb is, it to the rear of the engine. So is the bracket. And the head is very close to the firewall, no room to loop that long cable.
I tried to make others work and they were not.
bought the correct cable and $100 bux later it’s all done just like that.
here is a measurement chart, click the chart.
https://www.manciniracing.com/marathca.html
Last edited:
67coronetman
Well-Known Member
I don't have the part number but I will retrieve it tomorrow I got mine at AutoZone and it wasn't if I remember right 25 bucks at the time but I know they still have them because a friend of mine buy two more for cars that he had so I will get those numbers tomorrow and post them
Checked AZ last night and they carry no such part now.
Year One has one for a 66' 383 could work on a 440? 21.5"
https://www.yearone.com/Catalog/chrysler.b.body/air-.-fuel/accelerator-cables/big-block
https://www.yearone.com/Catalog/chrysler.b.body/air-.-fuel/accelerator-cables/big-block
Just for general info............ I have a good throttle cable off a 66 coronet that had a slant 6.
If anyone needs it for a tunnel ram install ect I will just give it to them, I will never use it.
If anyone needs it for a tunnel ram install ect I will just give it to them, I will never use it.
Similar threads
- Locked
