• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Name that part for a 1969 Dodge Charger

Kennith

Kennith

Active Member
Local time
9:32 AM
Joined
May 18, 2020
Messages
44
Reaction score
8
Location
Nashville, Tennessee
I got a box full of parts with a 1969 Dodge Charger and I’m trying to figure what some of these are.

If you can help it would be appreciated
D4ADCD9B-D44A-4341-A090-6AA9CCB39D65.jpeg
38E6C6D1-472C-4610-B23B-947C663A49FC.jpeg
47236D0A-8852-46EE-B7BD-5E6D11254A05.jpeg
ADEC118A-CD3E-4171-8E03-A3F5FF9F05AE.jpeg


upload_2020-9-14_19-59-54.jpeg upload_2020-9-14_20-0-17.jpeg
 
in pic one those rod supports mite be the ones that bolt to intake n rear of A/C compressor,pic four is a brake booster bracket,rest i have no clue,by pics not sure if for a 69 charger or not,check for part #
 
The adjustable rod in the first pic like like a throttle linkage.
The other plates? Maybe from a pulled apart brake pedal assembly or e brake assembly?
 
d4adcd9b-d44a-4341-a090-6aa9ccb39d65-jpeg.jpg


RV2 A/C support bracket and rods? Piece on the outside right is the kick down linkage rod from top of rear of motor down towards transmission
 
38e6c6d1-472c-4610-b23b-947c663a49fc-jpeg.jpg


two pieces that look similar are for 72-ish and later motors...throttle brackets. V looking piece mounts at the front on the LH front of intake and the throttle return spring run to it.
 
adec118a-cd3e-4171-8e03-a3f5ff9f05ae-jpeg.jpg


Not 100% sure on this one but would guess power steering bracket? Or for some portion of the accessories on the front of the motor...Alter, AC, idler, PS etc?
 
Thrashingcows said:
View attachment 1002109

Not 100% sure on this one but would guess power steering bracket? Or for some portion of the accessories on the front of the motor...Alter, AC, idler, PS etc?
Click to expand...


Looks like an alternator bracket for an A/C car, mid 70's maybe.

The welded nut is for the heater hose holder.


Most, if not all of those parts don't belong on a '69 Charger. Probably all came from a truck.

s-l640.jpg
 
Last edited:
MJF_ said:
3 rods goes under dash at drivers side.
Click to expand...

I initially though so too, but it's been a long time since I have been under the dash of a B-body. What made me question my initial thought was the bracket the 3 rods were tied to, could not place that bracket under the dash.
 
I appreciate everyone's help. It is hard to put something back together that you did not take apart.

I figured they gave me parts for another car when I found an in cabin hood release.

I am still trying to find the bolts to put the windows back in the car.

Thanks everyone.
 
The rods are under dash support. The brackets are unique to a big block with AC. That short 3 point bracket is AC only and might be for the alternator. I see a throttle spring bracket. Firewall stiffener plate for brakes. What appears to be a 70's small block throttle pressure and cable bracket.
 
You must log in or register to reply here.

Similar threads

QuickBpBp
How to decipher the date code on nos motor mount??
Replies
0
Views
409
QuickBpBp
QuickBpBp
dart4forte
ID This part
Replies
2
Views
629
krazykuda
krazykuda
L
Hooker 5903-1HKR headers for A 1969 b body 440
Replies
4
Views
730
Curiousyellow71
Curiousyellow71
dodge68charger
Dodge Superbee Post Finishing?
Replies
2
Views
578
dodge68charger
dodge68charger
D
Company now makes 1970 Dodge Charger headlight motor assembly
Replies
3
Views
1K
Dominic Torreto
D
Auto Transport Service
Back
Top