1970 roadrunner hood hinge to inner fender bolts

4406bbl · Sep 20, 2020

Did they use 3 of the 7/8 washer head bolts, or two 7/8 on the rear and one 1-1/8 at the front.

70chall440 · Sep 20, 2020

Not real sure but I always thought they were all the same.

PLMHEMI · Sep 20, 2020

All the same size.

Bob Sawyer · Sep 20, 2020

For what it's worth, my '68 Charger had 2 different size washers on the two rear bolts, with the larger one in the top hole.
This page is from the MMC-Detroit reference manual for Dodge B-body cars. I'm not sure about the Plymouth.

4406bbl · Sep 20, 2020

Thanks for that, I bought this car as a basket case so can't be 100% sure what it had, just know I had seen the larger washer on some cars. Is your charger a lynch road built car? Maybe the plant made a difference.

Bob Sawyer · Sep 20, 2020

No. Hamtramck.

Islandkent · Sep 20, 2020

My 70 Charger was built in St. Louis and have all the same size hardware.

Richard Cranium · Sep 21, 2020

My 1968 Charger survivor. The hinges have never been off or adjusted. Smaller washer in the top rear. This is the left side and it's the same on the right.

Larger washer in the front....

1970 roadrunner hood hinge to inner fender bolts

4406bbl

Well-Known Member

70chall440

Well-Known Member

PLMHEMI

Well-Known Member

Bob Sawyer

Well-Known Member

4406bbl

Well-Known Member

Bob Sawyer

Well-Known Member

Islandkent

FBBO Gold Member

Richard Cranium

FBBO Gold Member

Similar threads