Removing gutter rail trim tips needed
- Thread starter Spare Parts
- Start date
JimCoronette
Well-Known Member
Use an old school can opener with tape wrapped around it.
Use short increments and gently pull part way off from the bottom up.
Come back and pull it off some more.
Repeat until it's off.
Use short increments and gently pull part way off from the bottom up.
Come back and pull it off some more.
Repeat until it's off.
R413
Well-Known Member
I like to use a paint stick. Put another one under it to get the correct angle. Pry it out under the gutter. Use the window frame to pry on. Go a little at a time starting at the corner by the A pillar and moving back.
The can opener has too small a tab to pry on and it could damage the trim.
please tell us how it works out.
The can opener has too small a tab to pry on and it could damage the trim.
please tell us how it works out.
Last edited:
pushrod
Well-Known Member
The old fashion"church key"
bottle opener works for me. Take your time, lift in small increments and NEVER try prying it off with one pull.
bottle opener works for me. Take your time, lift in small increments and NEVER try prying it off with one pull.
Spare Parts
Well-Known Member
Got them off. Thanks for replies
Similar threads
