• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1974 Dodge Charger Bumper Locations

hunterrocks24

Active Member
Local time
8:46 AM
Joined
Oct 6, 2020
Messages
30
Reaction score
2
Location
Wisconsin
Hello Everyone!

I bought this car as a basket case and didn't have any of the rubber bumpers. I purchased a kit but asking the seller and trying to find pictures and videos online has proven to be ineffective. I have circled the bumpers I have left. If anyone knows where they go I would be extremely grateful! Thanks again everyone!

s-l1600.jpg
 
Wanna say hood deck lid doors
Want to say long tail ones go in fenders
 
those kits aren't year specific. a couple are for the glove box door, the rear license plate. mine also contained bumpers for the hideaway doors
 
One of the large round ones go on the rear center of the hood. Two of the ones on the right are license plate as mentioned, two smaller ones glove box door. medium round ones not on a 74 Charger, door and deck lid are square. Two pictured are for the deck lid.
 
One of the large round ones go on the rear center of the hood. Two of the ones on the right are license plate as mentioned, two smaller ones glove box door. medium round ones not on a 74 Charger, door and deck lid are square. Two pictured are for the deck lid.
Thank you so much!!!! I owe you one :praying:
 
hood uses 3 of them on rear... one higher in the middle and one on each side shorter as far I recall

squared ones are deck lid

front of fender are the "L" shaped ones.

The O ones are for the bumper hood adjsters

the 4 ones on right seems to be for rear lower license plate bracket, althouth it uses just 2. Can't recall if front license plate bracket uses some

the other 4 are 2 for glove box and 2 for dash ashtray

Can't say the extra one of the thicker ones circled on red

that's what my memory calls

doors uses a pair of these each

CH1013_800.jpg
 
Last edited:
and as mentioned, the spring loaded wedges on rear of fender with hood

b-body%20mopar%20hood%20alignment%20bumper%20kit%20spring%20loaded%20wedges.jpg
 
Auto Transport Service
Back
Top