Valvoline the official oil for FURYIOUS
- Thread starter cbodybob
- Start date
thats great 
cbodybob
Well-Known Member
Yes it sure is. Thank youthats great
last time I asked you if the car was ready to run,I think you were still working on the engine. Are you all set now?
cbodybob
Well-Known Member
Getting close. Real close
, congratulations on Valvoline for your car.
cbodybob
Well-Known Member
Thank you
- Local time
- 1:20 PM
- Joined
- Mar 28, 2014
- Messages
- 33,764
- Reaction score
- 53,608
- Location
- South Louisiana
I have used VR-1 in my Roadrunner since I bought it. Being a flat tappet hydraulic cam setup, it has worked great. I replaced ALL 16 lifters, springs, locks, pushrods, and retainers when I had problems with worn out springs and a couple of lifters collapsing.
I broke them in like a new cam, and I had used black moly lube for the assembly, a quart of break in oil additive, and the balance VR-1.
IF I didn't live where it's usually hot, I may try something else, because I have 20-50w commonly available. I see there is a 10-30w, so I may use that during the coldest part of the year, which is about 8 weeks long in
south Louisiana and Mississippi...lol. 
Once I get my 541 aluminum stroker motor, I expect to use solid flat tappet lifters, but I may look at one of the high end synthetic oils that also have the stuff that treat flat tappet lifters with the kind of ingredients they need.
I broke them in like a new cam, and I had used black moly lube for the assembly, a quart of break in oil additive, and the balance VR-1.
IF I didn't live where it's usually hot, I may try something else, because I have 20-50w commonly available. I see there is a 10-30w, so I may use that during the coldest part of the year, which is about 8 weeks long in
south Louisiana and Mississippi...lol. Once I get my 541 aluminum stroker motor, I expect to use solid flat tappet lifters, but I may look at one of the high end synthetic oils that also have the stuff that treat flat tappet lifters with the kind of ingredients they need.
cbodybob
Well-Known Member
Yep it has the most zinc or darn close. It’s good stuff
Paul Boucher
Well-Known Member
Congrats! Bob, I know you are in NC, but where do you race? I am in eastern NC.
cbodybob
Well-Known Member
Roxboro, & VMP usually. Sometimes Piedmont, Galot, Kinston. Come on out & meet
Paul Boucher
Well-Known Member
Cool deal. I just went to Piedmont for the Mopar drag and car show a few weeks ago. I live only about 40 minutes from Kinston, but haven't been there in years. PM me next time you are headed to Kinston and I will bring my son out and come meet you. Thanks, Paul
cbodybob
Well-Known Member
Will do. They run that winterfeast series there so maybe I can make one of those events
cbodybob
Well-Known Member
I actually find myself in Greenville a lot. Guy there does all my major body work on my restoration cars.
Paul Boucher
Well-Known Member
Cool! Is it Wolfen? I met him a few years ago at a local car show. Isn’t he from Australia? Neat guy.
cbodybob
Well-Known Member
That’s him. Was down at his place Sunday dropping off a Valiant.
- Local time
- 1:20 PM
- Joined
- Mar 28, 2014
- Messages
- 33,764
- Reaction score
- 53,608
- Location
- South Louisiana
cbodybob
Well-Known Member
Haha didn’t know he was a movie star. I’ll have to ask him about that
RM23M9A
Well-Known Member
Bitchin! I have an A12 due for an oil pan gasket. Was about to try post an ad in forums, WHAT OIL would be best? Factory was 10/40, but these days?
This "Valvoline VR-1" is THEE OIL? 69 440 6 Pack.
(Open to auggestions please!).
This "Valvoline VR-1" is THEE OIL? 69 440 6 Pack.
(Open to auggestions please!).
Similar threads
