• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Looking for 71 RR/GTX/Satellite top cowl panel

Status
Not open for further replies.

Ben Mowery

Well-Known Member
Local time
6:59 AM
Joined
Aug 18, 2018
Messages
61
Reaction score
14
Location
Indianapolis, Indiana
Feedback: 2 / 0 / 0
Looking to see if anyone is parting out a Satellite/RR/ or GTX. I am looking for an upper cowl panel and potentially the bottom 6” of the a-pillars.

Ben
 
Looking to see if anyone is parting out a Satellite/RR/ or GTX. I am looking for an upper cowl panel and potentially the bottom 6” of the a-pillars.

Ben

I am pretty sure we have the complete A-pillars from a 72 Charger. I'm not sure
if same as a Plymouth.. but someone here on the site, should know. Sorry, no cowl panel.
 
I am pretty sure we have the complete A-pillars from a 72 Charger. I'm not sure
if same as a Plymouth.. but someone here on the site, should know. Sorry, no cowl panel.
Have any pictures of them you could PM me? What are you asking for them?
 
Ben,
Hey Scot here I bought the rear axle setup tool. Send me a pic of what you need. I have 3 - 71 GTX/Satellites and a 71 Charger I am parting out. I am sure the Charger has the top cowl piece your looking for.
 
Ben,
Hey Scot here I bought the rear axle setup tool. Send me a pic of what you need. I have 3 - 71 GTX/Satellites and a 71 Charger I am parting out. I am sure the Charger has the top cowl piece your looking for.

looking for these areas. But would not rule out take these areas and a whole upper cowl panel.

Ben

E9A46DCD-F2BD-4EA2-B63F-3D827E821A2E.jpeg C06678E3-5B40-4B2E-9E0C-1D4E99088057.jpeg
 
I will look tomorrow, I am heading home now from work.
 
Early 71 had a different stamping than the later ones. Didn't have the drain channels on the sides under the fender tops.
73 Has the holes for the NOX valves. The red one is a 73.
I don't have any available. Really need to get my butt out into the yard and drill out some.
I do have a pair of complete A pillars.

01 (2).JPG DCP_0008 (2).JPG 20150930_090943.jpg 20171201_151011.jpg 20171201_151118.jpg
 
Early 71 had a different stamping than the later ones. Didn't have the drain channels on the sides under the fender tops.
73 Has the holes for the NOX valves. The red one is a 73.
I don't have any available. Really need to get my butt out into the yard and drill out some.
I do have a pair of complete A pillars.

View attachment 1012729 View attachment 1012730 View attachment 1012731 View attachment 1012732 View attachment 1012734

my car was a January 71. Would that be early or late? Have any close ups of the drains? What are you asking for the pillars? I really only need the end at the dash with the window channel. At any rate let me k ow what you have and what you are asking for it. Ty.

Ben
 
Status
Not open for further replies.
Auto Transport Service
Back
Top