• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Aluminum heads - paint ‘em or bare or?

These are just a couple of the steps to proper and lasting application of Nylac - and the products don't come in smaller quantities!

View attachment 1016395
upload_2020-10-19_22-5-23.png
this is what I was referring to, I've used it on several aluminum parts and it seals the aluminum to keep it nice from dirt etc.
 
Looks great!! Any issues with the stock valve cover's on the tf 240's?

Using roller rockers and no problem using the original 69’ valve covers. I heard the reproduction covers won’t clear on the ends when using roller rockers though.
 
ceramic coated mine helps hold heat in. supposed to help with fuel boiling, excessive engine compartment heat heads are holding up good exhaust manifolds discolored a little during cam
20190221_210720.jpg
break in period
 
I always paint mine for that stock appearing look. Well, sort of....

rsz_20160414_201144.jpg IMG9505711.jpg
 
All aluminum painted..........heads, intake, water pump & housing.

P2270009.JPG



Odds & ends added........

P3050026.JPG



And finally, installed........

P2250051.JPG
 
Last edited:
Auto Transport Service
Back
Top