• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

My new 66 Charger

I also have a 361 Charger... Upgraded from stock intake and 2bbl Carter to a 383 Performer intake and 4bbl Edelbrock 1411... I have a lot of hesitation on acceleration issues. I'm thinking maybe I have a vacuum leak somewhere? Did you have a similar issue? Also did you install additional intake gasket on top of the valley pan gasket?

Not to hijack your thread. Feel free to ignore.
 
The previous owner installed a cast iron thermoquad intake and the AFB carb. So far I have only removed the spacer he had installed incorrectly, and added new gaskets. No hesitation to speak of. I have a new Performer intake and Street Demon carb to install this winter. I bought the valley pan with blocked heat risers, which comes with the 4 paper gaskets. I will see how everything lines up before I decide whether to use the paper gaskets.

new intake.jpg
 
Auto Transport Service
Back
Top