SOLD 6pack & 2- 4s Air Filter Lids & Shaker Base

Price + Shipping from Fl. Paypal and you add the protection if you feel the need.


6pack. $100 nice piece, could use paint. No dings

this one is for 2x4. $100 has a few very light dings.

And also I have this Air Grabber single carb Base. Looks like new but priced way below at $550

you should state what base it is for 383 or 440,look it up on Nicks garage

Following

I'm checking with the guy I got it from now . I'll up date ASAP.

This is the info off of Nicks Garage.
The base plate pictured I have for sale, measures 2 1/2" at the cross bar and the throat sits flat on the table. So I would say it's for a 383/ 400. I will try to answer any questions




1970-1972

This style with the small round lid is similar but measures differently at the crossbar. Reader Mike Brodin provided the following measurements.

Height from bottom of air cleaner throat to top of crossbar

383/400 - 2 1/2"
340/440 - 2"QuickBpBp from Moparts provided the following images. If you set the air cleaner base on a flat surface, such as a table, the carburetor throat for the 383 and 400 will sit completely on the table. On the 340 and 440, the outer edge of the air cleaner will hit the table and the carburetor throat will not. You should be able to slip your fingers underneath it.

Thanks, I’m looking for a 440 base.