1970 Roadrunner

Gregg DeGeorge · Nov 29, 2020

Sail panels on a 70 roadrunner what holds them tight to the car ,mine are sagging in the middle I have new ones what to reinstall them to clean up interior

Kern Dog · Nov 29, 2020

Are you referring to the cardboard panels on the interior side of the C pillars? Aren't they wedged in place between the rear window trim and headliner border trim?

hunt2elk · Nov 29, 2020

If they are the same as 69's, there is a clip attached to the back of the panel that pushes into the car. Pretty common for the clip to come apart from the board.

cosgig · Nov 29, 2020

hunt2elk said:
If they are the same as 69's, there is a clip attached to the back of the panel that pushes into the car. Pretty common for the clip to come apart from the board.

and the clip is just pressed into the cardboard and held in place with little star shaped prong teeth. Not the most steadfast method. I believe I glued one of mine back in when it came loose.

hunt2elk · Nov 29, 2020

cosgig said:
and the clip is just pressed into the cardboard and held in place with little star shaped prong teeth. Not the most steadfast method. I believe I glued one of mine back in when it came loose.

Yes, I have used contact cement myself on them.

1970 Roadrunner

Gregg DeGeorge

Well-Known Member

Kern Dog

Life is full of turns. Build your car to handle.

hunt2elk

FBBO Gold Member

cosgig

FBBO Gold Member

hunt2elk

FBBO Gold Member

Similar threads