• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Hello from NC

HemiCap

New Member
Local time
9:48 AM
Joined
Dec 23, 2020
Messages
4
Reaction score
7
Location
NC
New to the forum, I have a 74 Charger I plan on doing a 6.4 Hemi 6 speed in. I will have questions I'm sure.
 
welcome to FBBO

good luck with the gen 3 Charger & modern Hemi/6 speed swap
 
Welcome aboard Sir, from the middle of the mitten! You will get a lot of good answers here.
 
Welcome from Alabama, Gen III Hemi swaps are great.
 
0635E1A1-ED8A-4BE2-8791-FBE8941359A3.png
FF374B69-2EA0-4E45-AE1D-7A240DCE3F6D.gif

@HemiCap Welcome from NJ!
 
Welcome from Missouri!! Once done, you'll like it!!
 
You wanted pictures you got them, the car is painted gray and they did wet sand it all but they never finished cut & buff. The last picture is my 74 from back in 74 and I'm planning to duplicate it except the power train.
IMG_2415.jpeg
IMG_2417.jpeg
74Charger-11.jpg
 
Hi, Nice looking car. I am planning a Gen 3 conversion on my 71 Satellite. My car has a very solid body. The car has been stored in pieces for the last 20 years, so I have a pretty clean slate to work with. How much of the Gen 3 conversion work are you doing on your own, and how much, if any, are you getting done by someone else? I need help and would be interested in your experience. I am in the Charlotte area, but have looked at shops up to 3 hours away, currently getting pricing and timing to start and finish the job. I want someone to do the engine, transmission, power steering and air conditioning in particular, and especially installing the computer system, so it is compatible and runs the car. I can do the suspension. Let me know how you're doing and I would appreciate any advice.
Thanks, Paul
 
Welcome aboard from Ohio.
 
Auto Transport Service
Back
Top