FOUND 70 383 valve covers

Charles Cook · Dec 26, 2020

Must be 70 model because 69 and 71 are different. Everyone that carries new ones are out of stock.

Sahara · Dec 26, 2020

I have a set that came off of a ‘70 Cuda Gran Coupe 383. Not perfect but not bad.

Charles Cook · Dec 26, 2020

Can you post some photos? Thanks

Sahara · Dec 26, 2020

Just defrosting them now because they were outside and I live in the arctic.I’ll post a few pix once they thaw.

Charles Cook · Dec 26, 2020

Lol it’s 25 degrees her in South Carolina. Burrrrrr

Sahara · Dec 26, 2020

Warmed up to minus seventeen here from the mid minus thirties a week ago.
These look better then they do in the pix. Surface rust only where the paint peeled.

davek · Dec 27, 2020

Charles do not buy AMD was not happy with them BUY original.

davek · Dec 27, 2020

Sahara said:
Warmed up to minus seventeen here from the mid minus thirties a week ago.
These look better then they do in the pix. Surface rust only where the paint peeled.

View attachment 1046058 View attachment 1046059

those are not correct for bb,one should have 2 holes

davek · Dec 27, 2020

http://www.1970gtxregistry.com/1967-71valvecoverreference/1964-71 valve cover reference photos.html

Charles Cook · Dec 27, 2020

Thank’s Sahara sorry you had to dig them out of the snow and I appreciate it but I’m looking for the ones with the twist on oil filler cap. Thanks again buddy. Mine had the oil filler cap , pvc and a breather cap. Thanks again I’ll keep looking.

Charles Cook · Dec 27, 2020

Thanks Sahara they look like this

Charles Cook · Dec 27, 2020

Thanks daveK, spot on , 70 had there own model. Thanks guys !

Charles Cook · Dec 27, 2020

davek said:
Charles do not buy AMD was not happy with them BUY original.

Hey Dave what was the issue with AMD ‘s

davek said:
Charles do not buy AMD was not happy with them BUY original.

Charles Cook · Dec 27, 2020

Thanks Dave , AMD is one of the venders that is out of stock, l will look for used originals if I have to.

davek · Dec 27, 2020

Charles Cook said:
Hey Dave what was the issue with AMD ‘s

I bought a set and the bolt holes were so far off I had to oblong the holes.It took me over 2 hrs to get them right. If I had to do it all over again I think I would buy originals. If that doesnt bother you Then go for it,no one will ever know.

Charles Cook · Dec 27, 2020

That will be my last resort, I’m going to see if I can locate some originals. Thanks

Sahara · Dec 27, 2020

Charles Cook said:
Thank’s Sahara sorry you had to dig them out of the snow and I appreciate it but I’m looking for the ones with the twist on oil filler cap. Thanks again buddy. Mine had the oil filler cap , pvc and a breather cap. Thanks again I’ll keep looking.

No worries, I never looked at the block to see when the motor was made, all I know about them is that they came from a Gran Coupe that we parted out years ago.

Charles Cook · Dec 27, 2020

Thanks

72 BLUE 400 · Dec 27, 2020

have this set

Charles Cook · Dec 27, 2020

They look straight, how much do you want for them ???

FOUND 70 383 valve covers

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

FBBO Gold Member

Well-Known Member

FBBO Gold Member

Similar threads