• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

64 dodge instrument question

J

justjim

Well-Known Member
Local time
10:12 AM
Joined
Feb 27, 2018
Messages
697
Reaction score
138
Location
wisconsin
does the voltage limiter on the cluster have to be grounded ?? also looking .
 
Yes. I believe the volt gauge and fuel level gauge work off the same circuit.
 
Isn't there a tab on yours welded to the case. One of three spade connection that plug into the printed circuit board. The limiter provides about 5 volts to operate the temp and fuel gauges.
Mike
 
Yes it has to be grounded to work and one of the tabs on it should be the ground. Ron
 
383man said:
Yes it has to be grounded to work and one of the tabs on it should be the ground. Ron
Click to expand...
can i just run a wire from the limiter to a good ground on the dash/fire wall ?
 
You must log in or register to reply here.

Similar threads

D
Capacitor for dash gages ( Omitted ? )
Replies
5
Views
2K
dcmason69
D
Geetex
  • Locked
SOLD NOS Instrument cluster voltage regulator
Replies
1
Views
612
Geetex
Geetex
Stumper
What’s This??
Replies
6
Views
740
pnora
pnora
R
Bulb holders
Replies
0
Views
408
rocket70
R
S
Gauge Cluster voltage limiter testing
Replies
8
Views
4K
pnora
pnora
Auto Transport Service
Back
Top