Help please identifying these.
- Thread starter BAFRAID
- Start date
R413
Well-Known Member
1) shims for fenders.
2) washers for shims that go at bottom rear of fender dog leg behind tire to shim them out from rocker panels. Two studs and nuts hold them on. They use round ones so they don’t fall out.
3) bolts to secure the tall fender splash shields behind the front tire.
4) studs and nuts that hold the fenders on. Top rear of engine compartment under the rear corner of the hood. He each side.
2) washers for shims that go at bottom rear of fender dog leg behind tire to shim them out from rocker panels. Two studs and nuts hold them on. They use round ones so they don’t fall out.
3) bolts to secure the tall fender splash shields behind the front tire.
4) studs and nuts that hold the fenders on. Top rear of engine compartment under the rear corner of the hood. He each side.
MoparDanMan
Well-Known Member
Nailed it.
SassyPants
Well-Known Member
Very Well Done R413!! Best, Brian
SassyPants
Well-Known Member
SassyPants
Well-Known Member
All of this is on a 66 Coronet 500. Upper left in Number 1. See between the fender and the Rad Support. Number 2 in Bottom Right and also what was just posted.
Number 3 is Bottom Left, just behind the front tire. Number 4 is Top right next to the Cowl. Best, B.
Oh, I used Bolts for the Bottom Right. My old ones were beyond restoration.
Number 3 is Bottom Left, just behind the front tire. Number 4 is Top right next to the Cowl. Best, B.
Oh, I used Bolts for the Bottom Right. My old ones were beyond restoration.
Similar threads
